The average rate of gasification in the regions of the Russian Federation is only 70%. Therefore, solid fuel boilers remain relevant in the market. The segment continues to develop, models with new features appear. In addition to classic solid fuel boilers of various capacities, manufacturers offer innovative pyrolysis and long-burning boilers. Experts are betting on the latter more and more often. But the classic ones, due to their low cost, remain in demand. Based on these two theses, I compiled a rating of the TOP 10 solid fuel boilers in 2022, which included popular models of various types. Hope this helps you make the right choice.
Technical parameters of solid fuel boilers
So, what should you pay attention to if you decide to choose the best solid fuel boiler:
Type of fuel. Different models may consume one or more types of fuel. Firewood, coal, peat briquettes, sawdust, pellets, straw or recycled waste are suitable for use.
Power. It must be calculated in such a way that it is enough to heat the entire area of the house and auxiliary premises.
Combustion chamber volume. This is one of the main indicators affecting the performance of the unit, the frequency of fuel loads.
Automation. The presence of such a mechanism allows you to free the owners from constant monitoring of the boiler.
Safety. The main elements necessary in any boiler are an alarm and an auto-shutdown function in case of a malfunction.
The need for access to electricity. Some models of heaters are simply not able to work without access to electricity. But most of the boilers can still carry out heating completely autonomously.
Useful factor. this indicator is calculated as the ratio between the actual power of the device and the heat capacity of the fuel used. The higher the efficiency, the less fuel is required to generate one unit of heat.
Operating time on one load. The inability to control the process makes the burning period of the fuel very short. You are unlikely to like a boiler that needs fuel every 4-5 hours. Modern models can work on one load for several days.
Ease of maintenance. Even the most wonderful boiler needs to be cleaned of soot and ash, purged and loaded with a new portion of fuel. The simpler all these processes are arranged, the more satisfied the owner will be.
Price. Boilers for heating a house are not the equipment that is worth saving on. In this case, you should not choose a heater, focusing only on a low price. The technical characteristics of cheap boilers are often far from ideal.
Only by comprehensively approaching the study of all the main parameters, we can choose for ourselves the best long-burning solid fuel boiler in 2022.
See also – Which heating radiators are better to choose for a house or apartment
TOP-5 classic solid fuel boilers
Classical boilers use for heating the heat obtained as a result of combustion inside the furnace. Most often, coal is used as fuel, firewood, peat briquettes are used. However, coal is still more economically profitable. Such boilers consist of a loading chamber with a heat exchanger and an ash pan – the lower part of the furnace for collecting ash. The disadvantages of such boilers are that you need constant monitoring of the process: reloading fuel, cleaning the ash pan and heat exchanger, most often low efficiency, although for some models it reaches 90%.
Teplodar Kupper Practice 8
Compact boiler capable of heating a room / several adjacent rooms with a total area of up to 80 m2. It uses firewood, coal, peat briquettes as fuel. Reliable – the heat exchanger is made of steel, the boiler body is cast iron. It has a built-in heating element to maintain the temperature, however, you will have to think over the power supply and grounding scheme. Heater power – 6 kW. Equipped with a thermometer to control the temperature. You can set the automation to maintain the set temperature with minimal user intervention. The price is 13 thousand rubles.
Pros:
price;
compactness (420×565×595 mm);
weight – 60 kg;
poker, fur coat – included;
different fuels can be used;
built-in heater.
Minuses:
not enough power to heat a large house;
case may become hot.
Budget proposal of a well-known manufacturer. Suitable for heating a garage, an extension, a small private house. Judging by user reviews, the heated area indicated by the manufacturer is somewhat overestimated. Optimally, in order to warm the air well even in severe frosts, you need to use the boiler in rooms of about 60 m2.
Lemax Forward-12.5
Differs from Teplodar KupperPraktik 8 in vertical fuel loading. This is convenient: you can pour coal from a bucket. This design feature is associated with a significantly higher height of the device. This model does not have heating elements to maintain the temperature. The maximum thermal power is 13 kW. Heated area – up to 130 m2. Fuel – coal, wood, coke. It is possible to install a non-volatile traction control. The price is 15 thousand rubles.
Pros:
price;
build quality;
compactness;
large heated area;
fast heating;
convenient fuel supply from above.
Minuses:
no heating elements to maintain the temperature;
when laying fuel a lot of dust, dirt, smoke. It is necessary to install the boiler in a separate room, although the dimensions allow installation in any room;
inconvenient to clean.
Suitable for homes up to 100 sq. m. As in the case of Teplodar KupperPraktik 8, the heating area declared by the manufacturer is overestimated, in severe frosts the boiler will not cope with it. Vertical loading of fuel is a controversial solution: it speeds up the process of its supply to the furnace, but has a side effect in the form of smoke and dust in the room.
ZOTA Box 8
Compact boiler, working on coal and wood. Designed for heating up to 64 m2. It has a hob – you can heat food or heat water, very convenient in a small production. It is possible to connect heating elements to maintain the temperature and a draft regulator – they are not supplied in the kit. The price is 16500 rubles.
Pros:
equipment (poker, scoop, chimney pipe);
design;
compactness;
furnace length – 40 cm;
hob;
chimney outlet angle – 135 degrees; can be placed vertically or horizontally with the help of an elbow.
Minuses:
small ash box;
not enough power to heat a large house;
case heats up.
A smart solution for a small home or workshop. A nice bonus is the ability to warm up food. If the latter is not important for you, you can save money and purchase Teplodar KupperPraktik 8.
ZOTA Poplar M 14
A popular boiler in our country. The reason is a large heating area (up to 120 m2), undemanding to fuel quality, large loading chamber. It has a separate large chamber for loading firewood, a solid assembly and a good design. You can connect a heating element and a draft regulator, but they will have to be purchased separately. The price is 27700 rubles.
Pros:
compactness;
design;
equipment (sliding damper, boiler cleaning kit);
large heated area;
fast heating;
keeps the temperature for a long time.
Minuses:
the walls heat up;
small ash pan.
Reliable, convenient boiler for space heating up to 120 m2. The best offer on the market in terms of price-quality ratio, if additional functionality is not needed.
Protherm Beaver 20 DLO
Boiler manufactured in Slovakia with additional functionality – the ability to work together with a gas or electric boiler to ensure constant hot water supply. For this, a two-pass heat exchanger with 4 sections is provided. The Protherm Beaver 20 DLO itself heats a room up to 190 sq. m charcoal and firewood. It has a built-in thermometer with a thermostat. The price is 54 thousand rubles.
Pros:
design;
fully cast iron body;
well painted;
large heated area;
large ash pan;
the ability to combine with electric or gas boilers;
high efficiency.
Minuses:
price;
furnace size;
it is impossible to connect a heating element to maintain the temperature;
marriage comes across. Several users complain about the heat exchanger leaking after several heating seasons.
A good boiler for heating a large house. It can be used as an auxiliary, in the presence of a gas or electric boiler. Taking into account the “lame” reliability, the weak point is the heat exchanger radiator and the high price, so I can’t unequivocally recommend this boiler.
TOP-2 pyrolysis solid fuel boilers
Pyrolysis boilers as a heat source operate on gas obtained by dry distillation, heated to temperatures of 600–800 degrees without air. Dry wood is considered the best fuel for such boilers – it gives the maximum amount of pyrolysis gas. Some models use coal as fuel. The design of such boilers is simple. Two chambers – a loading furnace and a gas combustion furnace. Advantages – requires less human intervention, it is possible to load fuel and clean the furnace less often, high efficiency (up to 90%) Disadvantages – dimensions and high price.
ZOTA Master 18
Boiler with a high level of efficiency (73%) and a hob. You can heat with coal or wood. It is convenient to monitor the readings of the system using the built-in pressure gauge and thermometer. The maximum heat carrier temperature is 95 °C. The maximum pressure in the heating circuit is 3 bar. Heated area – up to 144 m2. The price is 26300 rubles.
Pros:
high efficiency;
hob;
large heated area;
heats up quickly;
built-in pressure gauge.
Minuses:
smokes when laying firewood;
condensation forms in the chimney sump;
small booth.
For its price, this boiler is good for everyone, and side effects such as the need for control and the appearance of fumes during operation are a problem inherent in all solid fuel boilers.
Bourgeois-K STANDARD-20
Boiler with bottom fuel loading and top location of the afterburner. There are a lot of negative reviews about it online. Experts associate them with improper operation – the use of raw firewood, incorrect installation of the chimney. Subject to the technical instructions, the boiler has an efficiency of 85%, can heat an area up to 220 m2. It has a built-in pressure gauge and thermometer to monitor the state of the system.
Pros:
fuel economy under conditions of proper installation and operation;
large heated area.
Minuses:
price;
requires proper installation according to the instructions;
inconvenient to clean;
demanding on the quality of fuel – only dry firewood with a moisture content of less than 12%;
build quality;
smokes, overheats, clogs the chimney with tar due to improper installation and operation.
If you decide to buy such a boiler, it is better to call professionals to install it, from whom you can take a guarantee for the elimination of installation defects if they are detected. Otherwise, you risk getting a lot of problems due to the design features of the device. For beginners, I recommend an ordinary solid fuel boiler, for example, ZOTA Topol M 14 or more powerful models (for example, Topol M) for heating a large area.
TOP-3 solid fuel boilers for long burning
Long-burning boilers differ from conventional ones in a special air supply. Fuel burns out gradually, starting from the upper layers. Advantages – a large volume of the furnace, almost complete combustion of fuel, its economy, a minimum of ash and emissions into the atmosphere. Cons – relatively low efficiency.
ZOTA Poplar-16VK
New for 2019. Attractive is the variability of fuel loading: coal can be loaded through the top door of the furnace, located at an angle, for convenient loading from a bucket or bag, and firewood can be thrown through the sling door. The model has an increased heat exchange area and a large firebox. The burning cycle for 1 load is up to 10 hours. Any type and quality of fuel is suitable. Technically, the model received water-filled grates and a modified configuration of the heat exchanger: its tubes are made in the shape of a triangle, which reduces soot deposition on them and simplifies cleaning. Heated area – up to 120 m2. Additionally, you can install heating elements, a draft regulator. The price is 30500 rubles.
Pros:
quality materials and assembly;
fuel economy;
different fuels can be used;
large firebox;
large ash pan;
advanced design that promotes long burning;
the possibility of modernization through the installation of pellet or gas burners;
fast heating.
Minuses:
dimensions and weight;
no control panel.
This boiler, like the entire Topol-VK line, deserves attention, they cost a little more than Topol M similar in performance, while providing longer burning with less ash formation, they have large fireboxes and ash pans. ZOTA Poplar-16VK is suitable for heating a house or a production workshop.
Teplodar Kupper Expert-15
Universal top burning boiler with a large furnace, convenient vertical loading of shaft-type coal and additional sources of air supply. This ensures long-term burning – up to 24 hours from one load. For ease of loading and minimizing the risk of fuel spillage, a second stainless steel door is provided: everything that spills will remain in it, you just have to turn it over, sending the remaining fuel to the furnace. During operation, it also serves as protection against burning out of the main door. The same stainless steel plate protects the cleaning door. Supplied with a gate valve with 5 fixed positions. The heat exchanger is cleaned through the top door – very convenient. To maintain the temperature, a 6 kW heating element is already built into the boiler, but the draft regulator will have to be purchased separately. The price is 35 thousand rubles.
Pros:
high quality materials and assembly;
the ability to use any type of fuel;
you can connect the system from any side;
complete set (thermomanometer gate, heating element, accessories for cleaning);
long burning;
large heated area – up to 115 m2;
additional air supply;
convenience of loading fuel, cleaning the boiler;
the possibility of installing a draft regulator, pellet or gas burner.
Minuses:
price;
dimensions.
High-tech boiler, easy to operate, a good option for giving. If you can find fault with something, then these are the dimensions – after all, a separate room is needed for it. The price for this level of workmanship is justified, although some consider it high.
Stropuva Mini S8
The Lithuanian brand Stropuva is the progenitor of long-burning boilers. A bright representative of the company is the Stropuva Mini S8 model. Bright – both from the standpoint of technical equipment and from the standpoint of appearance: the yellow cylindrical body attracts attention at first sight. Boiler dimensions – 1350×557×557 mm, definitely require a separate room for installation. At the same time, the heated area is only 80 m2. Duration of burning from 1 load – up to 24 hours. This is achieved by adjusting the height of the air distributor and thanks to the built-in draft regulator. The price is 52900 rubles.
Pros:
build quality and materials;
design;
long burning;
the possibility of using any fuel;
low fuel consumption;
retains heat for a long time;
thoughtful design that allows you to adjust the air supply and draft.
Minuses:
weight – 164 kg;
price;
low power;
it is impossible to build in a heating element: probably, with such a duration of burning, it is not needed;
the window for loading briquettes, coal and firewood is located inconveniently (too low);
there are traces of use on the lining, which are very difficult to remove.
Great boiler for a small home. The price will be justified during operation due to fuel economy. As an alternative, I can offer Teplodar Kupper Expert-15. I consider it more profitable (costs almost 20 thousand rubles cheaper) acquisition, heats an area 2 times larger, has its own design advantages that ensure a long service life, long burning and fuel economy.
All water heaters are divided into 2 types – flow and storage. The latter are relatively inexpensive, consume less energy, do not require preliminary work on electrical communications, and therefore are so popular. The volume of storage tanks is from 10 to 100 liters. The most popular are 50-liter. The reasons are compactness and sufficient volume for operation by a family of 2-3 people. In the ranking, almost all models are 50-liter, but most of them have “big and little brothers” in the line.
If everything is relatively simple with volume, then it will be more difficult to deal with other selection parameters.. Cylindrical or rectangular? Horizontal or vertical mounting? Conventional or dry heater? The inner material of the tank? Number of heating elements and power modes? You must ask the sales assistant in the store to answer all questions in order to select a water heater with the necessary characteristics. Don’t want to study theory? Check out our rankings and narrow down your search to the top 8 models of 2022, selected in conjunction with experts, taking into account user opinions.
Table of participants in the rating of storage water heaters in 2022
Edison ER 50V
Characteristics
tank volume: 50 l
power consumption: 1500W (220V)
useful power: 1.5 kW
maximum water temperature: 75 °C
heating time: 105 min
control: mechanical
Unlocks the Edison ER 50V rating. The most affordable boiler in the ranking. It costs only 7,000 rubles. Made in the form of a cylinder with dimensions 585x490x470. The installation is vertical. Volume – 50 liters, power – 1.5 kW. The material of the tank is enamel. Adjustable heating level – rotary switch on the bottom and LED operation indicator. The maximum heating temperature is 75 degrees. It will not be possible to determine even visually the temperature of the water in the tank – the thermometer is not provided in the model. The kit includes a safety valve. Overheating protection provided. There is no protection against turning on without water.
Price.
Compact in height.
No thermometer.
Lack of protection against inclusion without water.
Short-lived. Users complain about failure in the first 3 years of operation.
There are no fasteners included.
The mounting plate on the boiler does not correspond to that indicated on the package (there are no cutouts for the heads of the anchor hooks).
The advantage of this tank is the price. One of the most demanded in the Russian market. 92% of Yandex Market users recommend to buy. We could not pass by the popular opinion and included it in the rating. However, both we and the specialists involved in the selection of models for the rating recommend taking a closer look at the competitors at a higher price.. You don’t have to pay a lot. For example, Haier ES50V-A2 is 2,500 rubles more expensive.
Edisson ER 50V can be considered if you need the toughest savings for a summer residence or when using a small amount of hot water, for example, wash the dishes, take a shower a couple of times a week for one person. In this case, he will serve for several years. Every year it is necessary to change the magnesium anode, otherwise you risk being left without a 3-year warranty on the tank, which is very relevant in this case.
Haier ES80V-A2
Characteristics
tank volume: 80 l
power consumption: 1500W (220V)
useful power: 1.5 kW
maximum water temperature: 75 °C
heating time: 165 min
control: mechanical
In seventh place is Haier ES80V-A2. The 80 liter tank is made in China. Inside – stainless steel heater, enlarged magnesium anode. The internal coating is enamel, which is theoretically not very good, but the 7-year warranty on the tank inspires hope. Installed vertically.
The manufacturer claims the impossibility of electric shock due to the use of patented Shock Proof technology. How it works – official sources do not report, it remains to believe in the word. The maximum heating temperature is 75 degrees. The heating time is not specified by the manufacturer. But taking into account the power of 1.5 kW, in our experience, this will take about 4 hours. Mechanical adjustment – the regulator is on the bottom, which, in our opinion, is not always convenient, it is better if it is located on the front of the tank. Included – RCD, protection against overheating and overpressure is provided, but there is no protection against switching on without water. Mounting is vertical. The price is 9,500 rubles.
Price.
Dimensions.
7 year tank warranty.
The manufacturer does not indicate the main characteristics of the tank on the website.
Heats up for a long time.
The thermostat is inconveniently located.
There is no thermometer.
We couldn’t find any negative user reviews for this model. Experts point out the enamel coating of the tank as shortcomings and the manufacturer’s cunning, which does not report the duration of heating (and this is one of the important characteristics of the device) and indicates the presence of patented technologies, without even giving a hint of how it works. 96% of Yandex Market users recommend, and service employees say that the model fulfills the declared warranty 7 years with proper preventive maintenance. The price is noticeably lower than for similar containers from competitors. We had no reason not to include this popular model in our country, but we clearly have better offers. So, the budget Thermex TitaniumHeat 50 V no longer hides its technical capabilities. And having overpaid 1,000 rubles, you can buy Ariston BLU1 R ABS 50 V SLIM, which is convenient with a thermometer and the ability to assess the temperature of the water in the tank without opening the tap.
Ariston BLU1 R ABS 50 V SLIM
Characteristics
tank volume: 50 l
power consumption: 1500W (220V)
useful power: 1.5 kW
maximum water temperature: 75 °C
tank coating: titanium enamel
control: mechanical
In sixth place Ariston BLU1 R ABS 50 V SLIM. A cylindrical tank with dimensions of 837x353x383 mm is convenient for installation in small rooms, it is installed vertically. The material of the inner tank is enameled steel with TitaniumShield coating. The heating element is tubular. Power – 1.5 kW. It will take a little more than 2 hours to heat the entire volume to a temperature difference of 45 degrees. The maximum heating is 75 degrees. Rheating level adjustment – rotary switch and internal thermometer with thermostat. Safety is ensured by protection against overheating, the presence of an RCD and protection against overpressure by draining water through an emergency valve. The average price on the market is about 11,000 rubles.
Compactness.
Simple connection.
RCD included.
Minimum heat loss.
Some users complain about the fragility.
Oexcellent model in terms of price-quality ratio. The only negative is a small percentage of rejects, which leads to tank leakage, as evidenced by individual user complaints. However, this became a decisive factor in the distribution of seats. Thermex TitaniumHeat 50 V is inferior in terms of heating speed, warranty period, but has no complaints about factory defects, and is much cheaper.
Thermex TitaniumHeat 50V
Characteristics
tank volume: 50 l
power consumption: 1500W (220V)
useful power: 1.5 kW
maximum water temperature: 75 °С
tank coating: glass ceramic
control: mechanical
In fifth place is Thermex TitaniumHeat 50 V. A budget tank from a Chinese manufacturer that uses patented innovative technologies. In particular, the inside of the tank is covered with bio-glass porcelain. According to the manufacturer, the material is superior in strength to enamel, retains heat well and exhibits some cleaning properties. The copper heating element contains an admixture of titanium, which in theory increases the service life. At the same time, the declared warranty for the product is 24 months, for the internal tank – 5 years. For comparison: the leaders of the rating offer a guarantee of 7-8 years. We conclude that Thermex is not so confident in its innovations. The installation is vertical, power – 1.5 kW.
Maximum heating – 75 degrees, heating up to a temperature difference of 45 degrees occurs in 1 hour 45 minutes – An excellent indicator in this price range. The tank is installed vertically, mechanical control, on the bottom. The model is offered in a different form factor. The model with the Slim prefix, with the same characteristics, has an elongated shape, dimensions 722x378x365 mm versus 527x445x459 mm in the regular version. The price is 9,000 rubles.
Price.
Available in two form factors.
Fast water heating.
Minimum heat loss.
Temperature control from below.
We were unable to find any negative user reviews. 100% recommendations on Yandex Market. But experts note a shorter warranty period compared to competitors. Therefore, we give this model 5th place. At the same time, the price is a decisive factor, if you are forced to save money, you can take this model. If you have the opportunity to overpay a little, it is better to consider models with a dry heating element Electrolux EWH 50 Formax or Zanussi ZWH S 50 Artendo DRY. They are more reliable and easier to replace heaters.
Gorenje OTG 50 SLSIMB6
Characteristics
tank volume: 50 l
power consumption: 2000W (220V)
useful power: 2 kW
maximum water temperature: 75 °С
tank coating: enamel
control: mechanical
In fourth place is Gorenje OTG 50 SLSIMB6. Belongs to the Gorenje design series. A strict and concise design, a rectangular body with rounded corners and a choice of colors – glossy black and white, an exquisite control panel framed with patterns. At the same time, the control itself is classic – a rotary control. Installation exclusively vertical.
With modest dimensions of 690x420x445 and excellent appearance, this is not a drawback. Inside – a steel tank covered with enamel and a heating element with a power of 2 kW, it provides heating of water to a difference of 60 degrees in less than two hours. Protected against overheating and overpressure. RCD is not included in the kit. Tank warranty is 5 years. The price is 15,000 rubles.
Brand.
Design.
Compactness.
No indication of water temperature.
For some users, the depth seems very large.
The brand name has long been associated with reliability.. We couldn’t find any negative reviews for this model either. The absence of temperature indication, of course, adds some inconvenience in operation, on the other hand, there is a light indicator of operation, and you can determine that the water has heated up to the set temperature by it. And the heating rate is higher compared to budget competitors. In terms of dimensions, some users note that the boiler protrudes strongly from the wall, which is due to the cylindrical shape of the inner tank. Some experts agree with this. The 80-litre version at the same depth is much taller and looks more compact, the 50-litre one is really a little “clunky”but interesting design solution and reliability.
One of the best solutions on the market with 1 heating element, but we suggest paying attention to models with 2 dry heating elements, comparable in price – Electrolux EWH 50 Formax and Zanussi ZWH S 50 Artendo DRY. They heat faster, there are several power modes, heating elements do not come into contact with water, which increases the service life and increases the level of safety.
Electrolux EWH 50 Formax
Characteristics
tank volume: 50 l
power consumption: 2000W (220V)
useful power: 2 kW
maximum water temperature: 75 °C
tank coating: enamel
control: mechanical
Top three opens Electrolux EWH 50 Formax. One of the most advanced water heaters in the ranking. Equipped with two independent heating elements, each of which is enclosed in a protective flask made of fiberglass and alloys. The absence of direct contact with water prolongs the life of the heaters. Inside the tank is covered with enamel, which theoretically makes it more vulnerable. compared to steel competitors. Additionally, a magnesium anode of increased mass is installed to reduce the formation of scale on the walls. The model has 3 working powers – 0.8, 1.2 and 2 kW, which allows you to use it without thinking about the state of electrical communications. True, the heating time to 75 degrees at minimum power increases and reaches 4 hours. At the maximum, the tank copes with this task in 2 hours.
Control – 2 rotary switches: power regulator and heating level regulator for 4 working positions, including ECO mode (55 degrees). Included is an overpressure valve, RCD. Overheating protection provided. From the standpoint of design, the model is one of the best in the ranking: a white case with a black insert for the control panel in a rectangular design looks premium. Can be installed both horizontally and vertically. The price is 17,000 rubles.
Price.
2 dry heating elements.
3 power modes.
Fast heating.
Design.
RCD included.
Vertical and horizontal installation.
Tank warranty – 7 years.
Some users complain about the quality of the complete RCD.
Black metal liner.
Some users are dissatisfied with the build quality: insulation coming out at the seams, a short circuit on the cover after six months of use due to the quality of the build materials.
No indication of water temperature.
One of the best models of the rating, not without flaws, more related to build quality. However, such cases are rare, 92% of Yandex Market users recommend the model for purchase. Our team joins them, considering the Electrolux EWH 50 Formax as the two best options in terms of price-quality ratio.
Ballu BWH S 50 Rodon
Characteristics
tank volume: 50 l
power consumption: 1500W (220V)
useful power: 1.5 kW
maximum water temperature: 75 °C
tank cover: stainless steel
control: mechanical
Second place goes to Ballu BWH S 50 Rodon. Unlike most competitors, it is made in the form of a parallelepiped. The dimensions of the device are 1075x555x350 m. The depth is especially pleasing, the tank protrudes minimally from the wall. Installation type – both vertical and horizontal, power – 1.5 kW. The maximum heating temperature is 75 degrees, which will take about 4 hours, up to 45 degrees it takes about 2.5 hours. Adjustment of the heating temperature is carried out by a rotary switch on the bottom of the device. Several operating modes are provided, including ECO – it is optimal in terms of energy consumption and negative impact on internal components.
The manufacturer claims that the use of this mode will significantly increase the service life and confirms this with an 8-year warranty, however, on the tank itself, made of steel with the addition of anti-corrosion elements – nickel and chromium, and not on the heating element. It is subject to warranty service only for 24 months. The heating element and the inside of the tank are protected by a magnesium anode, protection against overpressure and overheating is provided. The price is 16,000 rubles.
Design.
Compactness.
8 year tank warranty.
Vertical and horizontal installation.
ECO mode.
Low heat losses.
The regulator is inconveniently located when installed vertically.
No indication of water temperature.
We recommend this tank to owners of small apartments. It features a compact design that can be installed vertically or horizontally. Users have no complaints about the quality of workmanship. However, overpayment in this case is inappropriate. For this money, you can buy a tank with two heating elements and different power modes, for example, Electrolux EWH 50 Formax. Confused by single negative reviews about the build quality of this model? Then, having overpaid only 1500 rubles, get the perfect Zanussi ZWH S 50 Artendo DRY tank.
Zanussi ZWH S 50 Artendo DRY
Characteristics
tank volume: 50 l
power consumption: 2000W (220V)
useful power: 2 kW
maximum water temperature: 75 °C
tank cover: stainless steel
control: mechanical
The leader of the rating was Zanussi ZWH S 50 Artendo DRY. New from the famous Italian brand. Volume – 50 liters. It differs from most competitors in the rating by dry heating elements (they are in model 2) – they are enclosed in a protective flask and do not interact with water. It does not affect the heating rate in any way. Tank power – 2 kW, with heating incopes with water up to 75 degrees in less than 2 hours. Do you want to save electricity? There are two modes of operation – 700 and 1300 watts. Please note that the heating rate is directly related to the power, and therefore, when operating in 700 W mode, a full tank will heat up for about 5.5 hours. This mode is optimal for maintaining the specified parameter.
The temperature is regulated mechanically – a rotary switch with an ECO mark with heating up to 50-55 degrees. Thus, both electricity is saved, and scale in the tank is noticeably less. The inner lining is steel. The model is durable, the guarantee for the tank is 8 years. The conditions for replacing the magnesium anode remain. From protection – RCD, protection against overheating and overpressure. Installation is carried out both vertically and horizontally. The form factor is flat. Dimensions – 97 × 43.5 × 26 cm. Price – 20,000 rubles.
2 dry heating elements.
Compactness.
Horizontal and vertical mounting.
2 power modes.
8 year tank warranty.
RCD included.
Tight temperature controller.
No indication of water temperature.
After carefully studying the opinions of experts and user reviews, we managed to find 2 minor disadvantages. By all other criteria, the tank is ideal for installation in small rooms. More than 90% of Yandex Market users rated this model 5 stars. Experts also recommend to buy.
Let’s summarize. Conventionally, there are 2 niches on the market – budget and premium (the middle class in this segment is very weakly expressed). There are decent models in both niches. But our team recommends that when preparing for the purchase of a tank, focus on a price of 10,000 rubles or more. State employees are represented on the market quite extensively, but there are complaints about their quality. If you are already forced to save money by buying a cheap model, be sure to visually check the build quality, the absence of visible damage to the case and change the magnesium anode in a timely manner so as not to lose the warranty. The latter is also mandatory for premium models, but in practice the risk that they will leak before the end of the warranty period is many times less than in the case of cheap ones.
What to look for when choosing
Each manufacturer is confident that they produce the best boilers. Agree, it would be strange if the manufacturers did not praise their product. After all, any production requires considerable costs and it would be short-sighted to produce frankly bad products. But among the sound of “praise songs” it is quite difficult for an inexperienced consumer to decide on the list of necessary functions. It can also be difficult to understand what you can save on, and what “goodies” you should still spend money on. To understand all these issues, we will be helped by customer reviews, after analyzing which we have compiled a small list of really important selection criteria.
Volume of the tank. The range here is quite large: from 10–15 liters to 300.
Appliance power. The higher this parameter, the faster the boiler heats the water. But here it is important not to overdo it. You will have to pay the electricity bills.
Type of heating element. Most often it is a heating element or a special spiral. The former are a little more expensive, while the latter often “burn out”.
The presence of an anti-corrosion anode in the tank. The presence of such an element allows you to automatically “stick” small internal cracks inside the tank.
Degree of electrical protection. There are specific standards that the instrument must comply with. Your safety depends on this.
When choosing a storage water heater, you should carefully study each of these parameters. So let’s take a look at them in a little more detail.
tank capacity
The first thing that consumers advise to pay attention to is the volume of the tank. If you downplay this parameter, there will not be enough hot water for all the needs of the family and you will have to wait a long time until a new portion is heated. In the event that you decide to purchase a water heater with a large margin, remember – the larger the volume, the more expensive the price.
A tank with a capacity of about 30–50 liters is well suited for one person.. A larger model is a waste of money.
If your family consists of 2-3 people, a volume of about 80 liters is enough for you. But if your household prefers a shower instead of a bath, then 50 liters may be enough.
For a family of 4 or more people, stock up on at least a hundred liters of hot water. And for those who like to lie in the bath, you will need a tank of at least 120 liters.
There are also models with a capacity of 300 liters, but installing them in an ordinary apartment is not economically feasible. Such electric storage water heaters
most often installed in small hotels, as well as in shared showers at enterprises or in gyms.
Appliance power
Another important criterion is the power of the heating element. For 2022 models, this figure can range from one to 6-7 kW, while many units can be connected to both single- and three-phase power grids.
Thuto eliminate the “knocking out” of traffic jams, you need to carefully calculate the load on the electrical wiring in the apartment. If your network has been recently laid and is able to withstand significant loads, the power must be selected based on the desired rate of hot water production. As you understand, the more powerful the heating elements, the faster the liquid in the tank heats up. However, it is worth remembering that with an increase in power, the electricity bill also increases. So the “golden mean” is very important here. The optimal indicator is not higher than 2–2.5 kW, depending on the volume of the tank.
Internal coating of units and parts
Budget models most often have an internal coating of enamel or glass-ceramic. More expensive ones are equipped with stainless steel components or have a titanium coating. It is up to you to decide whether it is worth saving, but pay attention to this:
the warranty period for steel tanks is much higher;
steel models have a welding seam, which may leak a little over time;
on the net you can read user reviews claiming that a stainless steel tank negatively affects the taste of hot water and its smell.
By the way, if you are in doubt which model to choose, compare them by weight. The more the tank weighs, the thicker its walls, which means that the corrosion resistance will be much higher.
Extra options
There are a few more “gadgets” that the best models are equipped with:
Boilers come with a “wet” or “dry” heating element. “Dry” heating element is safer and more durable. It is placed in a special sealed flask and does not come into contact with the liquid at all. This eliminates the possibility of scale formation or electric shock.
Water tank insulation level. The thicker the insulation layer, the longer the water will stay hot. Pay attention to models with an insulating layer of at least 35–40 mm, and prefer polyurethane foam as a material, it is much better than foam rubber.
Pay attention to the presence of features such as accelerated heating, protection against overheating or freezing, the presence of a magnesium anode.
Having carefully studied our rating of electric storage water heaters in 2022, you can easily choose exactly the model that you like.
[expert_bq id=11452]Pay attention not only to the name of the manufacturer, but also to the country in which the unit was assembled. This will help you choose the most high-quality and durable device.[/expert_bq]
In this rating, I have collected 8 of the best convectors for 2022. Only the best models from different price ranges got into my TOP – from 2.5 to 16.5 thousand rubles. When selecting models, I paid attention to such characteristics as dimensions, operating modes, protective options, installation method and power, on which the heating area depends. It is worth considering that almost every model has different power variations. To evaluate the quality of heating, ease of operation and operating features of each model, as well as to objectively identify the pros and cons, I studied customer reviews and expert reviews.
Table of participants in the ranking of convector heaters for the home in 2022
Electrolux Air Stream ECH/AS-1500 MR
Characteristics
maximum heating area: 20 sq.m
heating power: 1500 W
installation: floor, wall
protection: overtemperature shutdown, waterproof case
number of operating modes: 1
control: mechanical
And I’ll start from the 8th place in my TOP, which is occupied by Electrolux Air Stream ECH / AS-1500 MR. This is a convector with a depth of 9.7 cm, a height of 40 cm and a width of 59.5 cm. Ventilation holes are located in the upper part of the front panel, and a switch is placed on the front panel with which you can adjust the degree of heating. The 1500 W model is designed for space heating up to 20 sq. m. m. It can work in one of two modes – at full or half power. The convector has a monolithic X-shaped ribbed heating element with a shell surface, due to which the heat transfer surface area is increased by 25% in comparison with standard heating elements.
It provides fast heating – in just 75 seconds, the heater reaches its full power.. The heater has a built-in overheating protection and a waterproof housing. You can install the convector on legs equipped with wheels or hang it on the wall. The kit includes both wall mounting brackets and a moving chassis.
Lightweight, compact.
Rapid heating of the room.
The kit includes everything for installation.
Two installation options.
Unreliable fastening of wheels to the heater.
There is no power indicator.
Short wire.
. This is a reliable model, equipped with a high-quality heating element that provides fast, efficient heating. It has simple controls and all the required security options. According to reviews on Yandex. Market, 92% of users recommend the model for purchase.
The next position is occupied by a model in the price segment above the average – Nobo NFK 4S 15. This is a model from a new series, which implements ecoDesign technology, which includes a new electrical circuit and an electronic control system with increased reliability. It has a built-in thermostat with manual control. Advanced thermostat maintains temperature to within 0.1°C and reduces standby power consumption to 0.5W.
The model has a moisture protection class IP 24, i.e. it can be installed in rooms with a high level of humidity. It is much larger in size: width – 102.5 cm, but it is very narrow – 5.5 cm, and does not interfere at all with wall mounting or when mounted on a chassis. A 1500 W convector is suitable for rooms from 15 to 20 square meters. m. The convector switches off in case of overturning and overheating.
Reliable performance.
Fast heating.
Narrow body.
Lots of security options.
. Compared with the previous model, it has a more concise design, an improved thermostat, low power consumption and a high level of moisture protection. 94% of users recommend this model.
Hyundai H-HV18-10-UI3321
Characteristics
maximum heating area: 13 sq.m
heating power: 1000 W
installation: floor, wall
protection: overheat shutdown, rollover shutdown
number of operating modes: 2
control: mechanical
The sixth position in my ranking is occupied by the budget Hyundai H-HV18-10-UI3321. This model of typical dimensions – 46x40x9 cm, is made in the author’s exclusive 3D design, has streamlined convex shapes and a non-standard panel for air outlet. Due to the special design of this block, the heater does not create flat air flows, but a body wave.. Moreover, due to the internal design, the air flow is amplified and brought out at high speed with excess pressure. BUT Stich is responsible for heating the air — a new generation heating element.
The model is equipped with a mechanical thermostat and two switches to select one of two modes. They are located on the sidebar. Installation is possible wall and floor on the chassis with wheels. The convector with a power of 1000 W is designed to heat a room up to 10-13 square meters. m. In case of tipping over and in the event of a threat of overheating, an emergency shutdown is activated.
Compact.
No sharp corners.
Fast heating.
Safety shutdown.
You need to get used to the side position of the switches.
Needle heating element.
. In comparison with the previous model, the convector is equipped with a non-waterproof housing and a simple mechanical thermostat. But for a budget heater, it has excellent equipment: a streamlined body without sharp corners, a special-shaped air duct block to enhance the efficiency of space heating. Almost all owners are ready to recommend a model for purchase.
Xiaomi Smart Mi Electric Heater 1S
Characteristics
maximum heating area: 22 sq.m
heating power: 2200 W
installation: floor
protection: overheating protection, shutdown when dropped
number of operating modes: 3
control: mechanical
The fifth step is occupied by Xiaomi Smart Mi Electric Heater 1S. Model of strict style and laconic design, like all products of this manufacturer. In terms of dimensions, it stands out with a larger width – 68.4 cm. The outlets are located on the top panel, and not on the front, which distinguishes it from all the convectors already described. Another model stands out with only one installation option – on legs. They are equipped with anti-slip inserts for stability. There are convenient handles on the sides for safe transfer around the room. For control on the side there is a touch panel with a displayas well as a switch at the bottom.
Using the touch buttons, you can turn on the heating, select the desired temperature, which is displayed on the screen, specify the operating time for the timer to turn off. For the convenience of the user, the display also shows the level of humidity in the room. The convector with a power of 2000 W is designed for a room with an area of 10-15 square meters. m. As with most Xiaomi appliances, the heater is connected using the application. In it, you can adjust settings, monitor work, and receive alerts about errors that occur. In case of overheating or tipping over, heating stops.
Stable legs.
Responsive touch controls.
Informative display.
Possibility of control through the application.
There are carrying handles.
Often there are problems with connecting through the application.
No wall mounting option.
. In comparison with the previous model, the convector does not provide for wall mounting, but it has a display indicating the set temperature and humidity level, the ability to control via the application, easy-to-carry handles and wide stable legs. All owners of this model recommend it for purchase.
Ballu Solo Turbo BEC/SMT-1500
Characteristics
maximum heating area: 20 sq.m
heating power: 1500 W
installation: floor
protection: overheating protection, shutdown when dropped
number of operating modes: 1
control: mechanical
Ballu Solo Turbo BEC/SMT-1500 is on the next step of the TOP. Convector of traditional design with wide outlets located on the front panel in the upper part and an enlarged air intake in the lower part. The model is equipped with a monolithic heating element made using Hedgehog technology.which made it possible to increase the heat transfer of the heater and the heating time by 20% with very compact dimensions of the equipment – 54x40x8.4 cm.
The convector is equipped with all the necessary protective options, it can work in rooms with a high degree of humidity. The heater is not designed for wall mounting.. It can only be installed on the legs that come with the kit. A 1500 W convector is designed to heat a room up to 20 sq. m. The model works only in one mode, but the degree of heating can be adjusted by a mechanical switch.
Stable legs.
Fast heating.
Maintains temperature well.
Can be installed in the bathroom.
No pens. It is inconvenient to transfer to other rooms.
Cannot be hung on the wall.
. Compared with the previous model, it differs in the placement of air outlets and shape, has a simple mechanical control and does not provide handles or wheels for easy movement between rooms. It is distinguished by a moisture-proof housing, which expands the possibilities of its use, and a high-quality heating element that provides efficient and fast heating. 92% of users recommend the model for purchase.
The top three is opened by the most budget heater in my TOP – Thermex Pronto 1500M. This is a floor model with legs. Air vents are located in the upper part of the front surface, and there are handles on the sides for easy transfer around the premises. The heating element of the convector is simple – a heating element, like most budget heaters.
The rotary switches are located on the side panel. One regulates the degree of heating, the other allows you to select the power. This model has three positions – 650, 850 and 1500 watts. The convector is designed for rooms up to 20 sq. m. The heater is equipped with a safety cut-out that is activated in case of overheating and tipping over.
Light.
Stable.
Three operating modes.
Fast heating.
Good heat dissipation.
It clicks when the relay is switched.
No wall mounting.
. In comparison with the previous model, the convector is equipped with comfortable carrying handles, stable legs and simple operation. It is distinguished by a large number of modes, but is equipped with a very simple heating element. Given the low cost, 89% of users are ready to recommend a model for purchase.
Noirot Spot E-5 Plus
Characteristics
maximum heating area: 20 sq.m
heating power: 1500 W
installation: floor, wall
protection: overtemperature shutdown, waterproof case
number of operating modes: 4
control: electronic
The second place in my TOP is quite expensive Noirot Spot E-5 Plus. This is a long heater – 74 cm, small height – 44 cm, and thickness – the depth of the device is only 8 cm. The model with a power of 2 kW is designed for a room with an area of 20-25 square meters. m. It is equipped with a solid metal heating element RX-Silence Plus, which quickly and efficiently heats the air in the room. Wherein works absolutely silently. The electronic thermostat also contributes to this, which, unlike cheap models, does not make clicks when heated and cooled.
The thermostat is responsible for the accuracy of achieving the set parameters and maintaining the temperature with relevance up to 0.1 ° C. Due to this, as well as low power consumption in standby mode (0.5 W), economical energy consumption and comfort without temperature fluctuations are ensured. Electronic automation withstands voltage drops from 150 V to 242 V. And when the power is turned off, the convector has an auto-restart function that restores operation in the previous mode. The convector is made in a streamlined shape, without sharp corners, which ensures safety of operation. The case does not heat up above 60 °C.
The control box is located on the top. It is represented by buttons that allow you to change the temperature and modes, and a display that shows the selected parameters. The model has 3 operating modes – Economic, Comfort, Antifreeze. The heater can be used in rooms with a high level of humidity, where it may be splashed, as the model has a high level of dust and moisture protection – IP24. You can place the device both on the wall and on the legs with wheels that come with the kit. The body with polymerized epoxy paint retains its attractive appearance for a long time and is resistant to mechanical stress.
Reliable build.
Accurate thermostat.
Convenient modes.
Simple control.
Precise temperature control.
Waterproof case.
Short wire.
High price.
. This is the most expensive model in my rating. It differs from previous convectors in equipment, namely an electronic thermostat, which precisely maintains the set temperature. Noirot has three operating modes, a convenient electronic control unit with a display, a waterproof housing and a heating element that ensures the heat balance in the room. 96% of users recommend the model for purchase.
RESANTA OK-2000
Characteristics
maximum heating area: 20 sq.m
heating power: 2000 W
installation: floor, wall
protection: overtemperature shutdown, waterproof case
number of operating modes: 1
control: mechanical
And the first place in the rating was taken by RESANTA OK-2000. The model is quite large in size: width – 90 cm, designed for rooms of about 20 square meters. m. Device power – 2 kW. Fast heating is ensured not only by a high-quality heating element, but also by a large area of air vents located on the front panel. You can install the convector on the wall or on the legs with wheels that come with the kit.
The body is waterproof, so you can use the device in the bathroom and other similar rooms.. The control is represented by two regulators – the choice of full or half power and the degree of heating. Like all models, it is equipped with a thermostat to automatically turn off when the set parameters are reached and turn on when it cools down. The model provides a protective shutdown in case of a threat of overheating and capsizing.
Simple convenient control.
Two installation options.
Automatic work.
Waterproof body.
Fast heating.
There are clicks when turning off.
. The model is largely similar to the previous one: a high level of moisture protection, the possibility of wall mounting, easy-to-transport wheels. But this convector has a mechanical control, i.e. it will not work to choose the temperature. In general, this is a reliable, efficient, high-quality, inexpensive heater. 92% of users think so.
In this ranking, I have collected the 20 best heaters for 2022. Only the best heaters from different price ranges got into my TOP – from 1 to 12 thousand rubles. For convenience, I divided the rating into 4 categories according to the type of heating: convectors, infrared, oil, fan heaters. When selecting models, I paid attention to such characteristics as power, dimensions, operating modes, heating area, security features. And in order to be as objective as possible and identify the pros and cons of each model, I studied customer reviews and expert reviews.
Table of participants in the rating of heaters for home and summer cottages in 2022
What are heaters for home use?
Today we will consider only 4 of the most basic types of heater:
fan heaters;
oil heaters;
convectors;
infrared heaters.
They differ from each other in appearance, device and method of heating the room. Each type of device has its own distinctive characteristics, advantages and disadvantages. All this, as well as the rating of the best models, we will definitely consider in our review, and will be able to figure out – what are they – the best heaters for the home?
Convectors – quiet and discreet
The principle of operation of this type of heaters is based on a common physical phenomenon. A brief excursion into the school physics course – convection is a phenomenon due to which hot heated air rises up under the ceiling of the room, and cooled or cold air remains below, near the floor. Inside the device is a powerful heating element, usually made of ceramics. Such a device heats the air, and it rises, and the cooled air gently settles down, where it is again heated by a floor convector. As you understand, convectors are absolutely silent, except for those models that are equipped with a fan. It is convenient when the convector is provided with an accurate temperature controller – this way you can set the preferred operating parameters of the device yourself.
Pros:
quiet work;
heating efficiency;
compactness;
attractive design;
availability;
profitability;
ease of handling.
Flaws:
dries the air
heats the room locally;
works best in small spaces.
Let’s find out which heater is better to choose among various convectors. TOP 5 best devices.
Noirot Spot E-5 Plus 1500
Characteristics
maximum heating area: 20 sq.m
heating power: 1500 W
installation: floor, wall
protection: waterproof housing
control: electronic
number of operating modes: 4
Let’s start with the rather expensive Noirot Spot E-5 Plus 1500. This is a convector 1500 W for space heating 15–20 m². It is quite compact in size – only 52x8x44 cm, and has a low weight – 4.7 kg. The convector is made in a laconic design with rounded edges, which ensures safety during operation. It can be wall mounted, for which special fasteners are provided, or installed on legs with wheels for convenient placement in any part of the room, but they must be purchased separately. On the top of the device there are control buttons and a display on which the selected air temperature readings are displayed. The model is equipped with a thermostat, which ensures the accuracy of regulation and maintenance of temperature conditions up to 0.1 °C and energy savings, including due to low consumption in standby mode.
In the event of a temporary power outage, the device continues to operate in the same mode thanks to the auto-restart option. It is also resistant to power surges. Can work in 4 modesincluding economical and automatic (when the device works constantly to maintain the set temperature in the room, turning on and off as necessary). Of the security options, it is worth highlighting the automatic shutdown in case of danger of overheating and a waterproof casewhich is typical of almost all modern models. But due to the high level of moisture protection (IP 24), the convector can be installed even in the bathroom, because it is not afraid of splashes. ToThe body of the device does not heat up above 60 °C, so the risk of burns is minimized.
Quality build.
Quickly heats up the air in the room.
Convenient management.
Holds the set temperature exactly.
Several modes.
The case does not heat up.
Legs are not included.
. This model of the French manufacturer is characterized by high reliability, safety, automation and accuracy of maintaining the temperature, taking into account the specified parameters. Equipped with convenient electronic control and display, although, of course, it costs almost 2 times more than other models in the rating. 98% of users recommend the model for purchase.
RESANTA OK-2000
Characteristics
maximum heating area: 20 sq.m
heating power: 2000 W
installation: floor, wall
protection: overtemperature shutdown, waterproof case
control: mechanical
number of operating modes: 1
On the fourth step of the RESANT OK-2000 top. Model with a power of 2000 W, designed for space heating up to 25 m². Has large dimensions, in particular, a larger width – 90 cm, and a significant weight – 6 kg. It can also be placed on the wall and on the floor, for which legs with wheels are provided, which are included in the kit.
The model is controlled by two regulators located on the side of the case. They allow you to turn on the device and set the intensity of heating. The model is equipped with a thermostat, which turns off work when there is a threat of overheating and turns it on when the air temperature drops, but it is not designed to accurately maintain the set temperature, like the first model. The body of the device is protected from moisture.
Rapid heating of the room.
Everything needed for installation is included.
Holds temperature well and doesn’t overheat.
Easy to manage.
There are clicks during heating and cooling.
The price is 5,500 rubles. Compared to the first model, it has more power and is suitable for larger areas. But this is a simpler model with a minimal set of features: it is not equipped with a display, does not allow you to accurately set the air temperature and has only one mode of operation, although with the ability to adjust the intensity of heating. 90% of users recommend the model for purchase.
On the third stage Ballu Enzo BEC/EZER-1500. It has a rather interesting design, rounded shapes and small dimensions – 40x59x11.3 cm. Power – 1500 W, it can operate in two modes – at maximum and half power – 750 W. Designed for rooms up to 20 m². The control panel consists of touch buttons and a display, it is placed on the top of the case. In this model, the manufacturer used a new technology in mounting the Thermoresist compact heating element.innovative system of uniform convection Homogeneous flow and large air intake Intake. All this, combined with the new generation Double G Force monolithic heating element, ensures the speed and efficiency of heating and the durability of the device.
Separately, it is worth noting the special coating of the back cover Anti Dirtpreventing accumulation of dust. The device can be mounted on a wall or installed on a wheeled chassis that comes with the kit. In case of a strong inclination or fall of the convector, it turns off for safety.. Of the additional security options, it is worth highlighting the presence of a protective lock of the control panel from accidental switching by children. Like previous models, has a waterproof case.
Compact, lightweight.
Heats up the room quickly.
Informative display, convenient location of the control panel.
There is a child lock.
Short wire.
When cooling and heating, there are clicks.
It wobbles a little on its legs if touched.
The case gets quite hot.
. Compared to the previous model, it has 2 modes of operation, is equipped with a display, has the ability to lock from children, safety shutdown in the event of a fall, but most importantly, excellent equipment using innovative technologies that increase work efficiency. 89% of users recommend the model.
Electrolux ECH/AS-2000 MR is on the second place of the top. This model is also equipped with an X-DUOS monolithic heating element. It has a unique “shell” coating, which allowed to increase heat transfer by 25% compared to monolithic elements that do not have such a surface. This 2000W convector reaches full power in just 75 seconds.
Suitable for rooms up to 25 m². Equipped with a mechanical thermostat, which allows you to adjust the intensity of heating and maintain constant heating of the air in the room. Provides 2 operating modes. The device has a built-in protection against power surges and a waterproof housing.
Nice view.
Light.
Reliable build.
Rapid room heating.
Simple control.
There is no power indicator (it is not clear whether it is on or not).
The leg fitting is flimsy.
Compared with previous models, it has a unique type of heating element, which provides a fast heating rate and high heat dissipation. Otherwise, it is in no way inferior to analogues, it has all the necessary protective options, an adjustable degree of heating, although there is no display and electronic control, like Ballu.
And the leader among convectors was Xiaomi Mi Smart Space Heater S (KRDNQ03ZM). This is the most powerful model in the ranking – 2200 W, which stands out primarily for its “smart” capabilities. Its operation can be controlled through the application – turn it on, select the temperature, set the time to turn it off, and so on. The convector is equipped with an intelligent temperature control system. It automatically turns on if the air temperature falls below the set parameters, and turns off when they are reached.. Accurate digital thermostat allows you to adjust the heating, choosing from 6 temperature settings – from 18 to 28 °С. And with the help of a timer, you can choose the operating time – 1-5 hours. The app has a timer up to 24 hours.
An exclusive feature of the convector is the presence of a drying shelf. It is a metal strip, which in the usual position is placed vertically. If it is necessary to dry things, it must be pulled out so that things are located opposite the convection holes. So the manufacturer solved the problem of users who, despite strict warnings not to dry things on heaters, still prefer to do so. The drying shelf can withstand weight up to 1.5 kg. Drop protection for safety. This model stands out from the background of others and the lack of wheels on the legs, as well as the lack of the possibility of wall mounting.
Compact size.
Fast heating.
There is a clothes dryer.
Convenient app control. It has more options for settings.
There is a child lock.
No brackets for wall mounting.
The back wall gets quite hot.
. In comparison with the models described in the rating, it stands out for the presence of remote control and monitoring the status of the device through the application, the presence of a drying shelf and a timer. It is second only to the lack of wheels, which seem to many to be a very convenient option. 95% of users recommend the model for purchase.
Infrared heaters – domestic sun
Infrared heaters have come into use recently. Like everything new and completely misunderstood, infrared heaters are often condemned for their negative impact on the human body. However, it’s not like that at all. The principle of operation of this type of heater, although different from all previous types of device, is still nothing revolutionary. In fact, buying such a heater at home, you are buying a small technical sun. Like the sun, the device creates streams of heat rays that are absorbed by various objects in the room. Then, these objects themselves begin to give off heat rays to the surrounding space. Everything is simple!
Device features:
the lowest power consumption;
absolute noiselessness;
reliability;
fast heating;
does not burn oxygen in the room.
Flaws:
heating is mostly local;
Let’s get acquainted with the most optimal models of IR heaters for home use. So that you know what to choose from.
RESANTA IKO-2000L
Characteristics
maximum heating area: 35 sq.m
heating power: 2000 W
installation: wall
features: thermostat, temperature adjustment
control: mechanical
number of operating modes: 1
Let’s start with RESANT IKO-2000L. Model with 2000 W quartz heating element, designed for wall mounting. The brackets on which the device is hung have a swivel design: it can be rotated by 60° to aim at various surfaces. It is designed for space heating up to 35 m², operates in one modebut is equipped with a thermostat that regulates the degree of heating and turns off the device when there is a threat of overheating.
Reliable build.
Fast heating.
Insensitive to voltage drops.
Cracks while working.
The case gets hot.
Short wire.
. High power model with convenient angle adjustment for wall mounting. All owners of the model recommend it for purchase.
RESANTA IKO-800
Characteristics
maximum heating area: 10 sq.m
heating power: 800 W
installation: ceiling
protection: overheating shutdown
control: mechanical
protection class IP20
On the fourth place RESANT IKO-800. This is a ceiling model for space heating up to 16 m². For larger rooms, it is recommended to install 2 or more appliances. Hanging chains and carabiners are provided for mounting. Differs in low power – 800 W, and much smaller dimensions.
Tthermally insulated housing according to the degree of protection belongs to the class IP20. This indicates the presence of dust protection, but no protection against moisture, therefore, it is not recommended to use the heater in rooms with a high level of humidity and with the possibility of splashing.
Easy installation.
Heats things up quickly.
Shuts off when overheated.
Thermally insulated steel body.
Slight crackling on heating and cooling.
Not effective if the ceilings are high.
There is no performance indicator.
. Compared with the previous model, it has smaller dimensions, is inferior in power and differs in the installation method. 82% of model owners are satisfied with the quality of heating, they note the need to install on low ceilings or use two devices at the declared power to achieve the best effect.
Electrolux EIH/AG2-2000E
Characteristics
maximum heating area: 25 sq.m
heating power: 2000 W
installation: floor, wall
protection: overheat shutdown, rollover shutdown
control: electronic
number of operating modes: 2
In third place Electrolux EIH/AG2-2000E. This is an infrared-convective heater that combines infrared heating, an increase in air temperature due to the radiation of thermal energy and a convective heating method, due to which warm air is evenly distributed throughout the room. The device can be mounted on a wall or installed on legsequipped with wheels. It works in two modes with different power – 1 and 2 kW. Equipped with an electronic control unit and an electronic thermostat, which provides temperature setting accuracy up to 1 °C. It also allows you to set the timer.
For convenience of management and control it is equipped with the display with illumination. Designed for space heating up to 25 m². Classified IP24protected from dust, moisture and direct splashes. A safety shutdown works to prevent overheating, and there is also a rollover shutdown. Another safety feature is a child lock.
Reliable build.
Fast heating.
Precise maintenance of the set temperature.
Informative display.
Safe for children. The case does not heat up.
Short wire.
With strong heating, the grate in the upper part of the heater may be deformed.
. Compared to other infrared heaters, it stands out for its efficiency due to the presence of a convection function, which provides faster heating of the air due to the even distribution of heat throughout the room. And although some users believe that it is better to replace such a heater with a conventional convector in order not to pay for infrared radiation, 93% of the owners of this model are completely satisfied with its reliability and capabilities.
Ballu BIH-AP4-1.0
Characteristics
maximum heating area: 12 sq.m
heating power: 1000 W
installation: floor, wall
protection: waterproof housing
control: mechanical
number of operating modes: 1
In second place is Ballu BIH-AP4-1.0. It stands out for its sophisticated look, has a compact body and walls with increased angles of inclination. Complete with universal swivel brackets that facilitate installation and allow you to adjust the heating angle. It can be mounted on a wall or ceiling at a height of 2.5-3.5 m in a direct way or at an angle in increments of 30°.
In comparison with the models described in the rating belongs to a higher class of dust and moisture protection – IP54. Therefore, it can be used even outdoors, for example, under a canopy. The surface of the body has an anodized coating with a thickness of 25 micrometerswhich ensures a long service life of the device. The heater is controlled mechanically, provides 1 mode of operation at a power of 1 kW. Designed for rooms up to 12 m².
Neat look.
Many mounting options, including at an angle.
Waterproof terminal block.
Good heating quality.
The case gets very hot.
Clicks at work.
. Compared to Resanta, it stands out for its more reliable performance: surface anodization, high dust and moisture resistance, outdoor use, long service life. 90% of model owners recommend it for purchase.
Ballu BHH/M-09N
Characteristics
maximum heating area: 14 sq.m
heating power: 800 W
installation: floor
protection: overheat shutdown, rollover shutdown
control: mechanical
number of operating modes: 1
Ballu BHH/M-09N became the leader of infrared heaters. This model stands out for its design (floor heater) and compactness. Heating is carried out using a quartz infrared tube, which is covered with a protective grille. Designed for space heating up to 14 m².
It can operate in two modes – with full and half power – 800 and 400 W, respectively. It is equipped with protective options – shutdown in case of overheating, in case of tipping over or tilting. But according to the level of dust and moisture protection, it belongs to the class IP 20i.e. it is unstable to moisture.
Nice neat look.
Compact.
Heats up the room quickly.
2 operating modes.
Disables when dropped.
The grate gets very hot. You need to be careful.
The model is not equipped with a thermostat and does not allow you to accurately set the temperature. But it stands out for its compactness, mobility, does not require installation and has a quick readiness for work both indoors and outdoors. Users highly appreciated the efficiency and reliability of the device, especially considering the low cost. 85% of them consider the model to be optimal in terms of price-quality ratio.
Oil coolers – a combination of mobility and productivity
Outwardly, this type of device resembles a conventional sectional cast-iron battery. However, in fact, the body of such a radiator is made of lighter steel, which heats up many times faster. Most often, oil coolers have wheels for easy transportation. All seams are sealed. Inside – mineral and environmentally friendly oil, which is heated almost to a boil.
Advantages:
democratic value;
environmental friendliness;
device reliability;
noiselessness;
ease of installation and use of the device.
Often, such devices become drying for barely damp items of clothing – socks, gloves, handkerchiefs. But you should be careful – it heats up to such an extent that it will easily leave a burn on the skin.
Flaws:
slow heating;
hot body;
takes up quite a lot of space.
Nevertheless, if such a device suits you, let’s find out which oil coolers are bought most often for houses and apartments?
Ballu Classic BOH/CL-07
Characteristics
maximum heating area: 20 sq.m
heating power: 1500 W
installation: floor
protection: overheating shutdown
control: mechanical
number of operating modes: 1
Opens the top five models Ballu Classic BOH/CL-07. The 1.5 kW heater is designed for rooms up to 15 m². Provides 3 operating modes with different power levels: 0.6, 0.9 and 1.5 kW. Rotary switch model with new generation Opti-Heat thermostat automatically maintains the set temperature and turns off when it is reached to avoid overheating.
The device of small dimensions 58x33x13 cm looks like a 7-section radiator. Due to the external protective anti-corrosion coating “Protective coating”, it is resistant to external negative effects and long service life. Separately, it is worth noting the presence of a compartment for storing the wire and the design of the legs with wheels, which ensures a stable position and eliminates the risk of tipping over.
Appearance.
Stable.
Maintains stable temperature.
Easy to move around the room.
Keeps warm for a long time.
There is a place to store the wire.
Switches are hard.
According to reviews, there is a single case of marriage.
Like all oil heaters, it heats the room for a long time, which is why it is allocated with a large energy consumption when compared with other types of heaters. But this is typical of all devices of this type.
The rest of the model is well-assembled, has an anti-corrosion coating, three operating modes with different power levels and an original design that gives an attractive appearance and ease of use: wheels, stable legs, a compartment for wires. 84% of buyers recommend the model for purchase.
Oasis US-15
Characteristics
maximum heating area: 15 sq.m
heating power: 1500 W
installation: floor
protection: overheating shutdown
control: mechanical
number of operating modes: 1
In fourth place is Oasis US-15. This 7-section model also features power of 1.5 kW and is designed for space heating up to 15 m². It can operate in three power positions, which are switched by rotary switches located on the side panel.
By design, the device is similar: it is also equipped with stable legs with wheels for ease of movement and a compartment for winding the cord for storage. A handle is provided at the top of the case, for which it is convenient to transport the heater around the room. It is equipped with overheating protection.
Compact.
Comfortable handle.
Simple control.
Holds the set parameters, turns itself off and on.
Cheap body materials.
Slow heating of the room.
. Despite the lower cost, the main characteristics of the heater are similar to the previous model. It is equipped with a handle for ease of movement, but does not have an anti-corrosion coating. Users note low reliability and workmanship. But given the low price, all owners of the model recommend it for purchase.
NeoClima NC-9307
Characteristics
maximum heating area: 15 sq.m
heating power: 1500 W
installation: floor
protection: overheating shutdown
control: mechanical
number of operating modes: 1
The top three is opened by NeoClima NC-9307. Despite the lower cost, the heater has a similar power – 1500 watts. Suitable for space heating up to 15 m². It can work in three modes, equipped with a thermostat and a protective shutdown in case of overheating. The heater is equipped with wheels, a control panel on the side of the body and cord wrappers for easy storage. Separately, it is worth highlighting the design feature of the model – rounded shapes, which makes it not only safer, but also more attractive.
Reliable performance.
Design. Rounded edges of sections.
Constant temperature maintenance.
Safety shutdown.
When you first turn it on, an unpleasant odor is possible (an isolated case).
. This is the most budget heater, but with a fairly high-quality assembly, as evidenced by reviews. In terms of characteristics, power and adjustment method, it does not differ from the models already described. Almost all owners recommend it as the best price-quality ratio.
Electrolux EOH/M – 7209 2000W
Characteristics
maximum heating area: 25 sq.m
heating power: 2000 W
installation: floor
protection: overheat shutdown, rollover shutdown
control: mechanical
number of operating modes: 1
In second place is Electrolux EOH / M – 7209 2000W. This is a more powerful model than those described in the rating above (2 kW), consisting of 9 sections. Designed for rooms up to 25 m². It can work in three modes with different power levels – 0.8, 1.2 and 2 kW. It is equipped not only with protection against overheating, but also with an emergency shutdown in the event of a rollover or a strong slope. It is distinguished by slightly larger dimensions – 64x42x24 cm, and a large weight – 8.6 kg (previous models weigh about 6 kg). Equipped with wheels for ease of movement and a folding handle.
Convenient carrying handle.
Stable.
Easy to operate.
Powerful.
Good heating quality.
There is no cord winder.
. When compared with the first described model, as an analogue in price, it stands out with more power and the presence of a protective shutdown in the event of a rollover. And although the model does not have features in the form of an anti-corrosion coating or at least compartments for winding wires, it is in steady demand. 83% of users recommend it for purchase.
RESANTA OMPT-9N/9NCH
Characteristics
maximum heating area: 20 sq.m
heating power: 2000 W
installation: floor
protection: overheating shutdown
control: mechanical
features: thermostat, temperature adjustment
And the leader of my TOP was RESANTA OMPT-9N/9NCH. It is also a 2-kilowatt 9-section heater, characterized by a thinner thickness – only 14 cm. Designed for rooms of about 20 m². The model is distinguished by rounded shapes, which ensures safety of use and adds aesthetics to the appearance. For the cable, a special fastening is provided for winding and fixing it, so that it does not interfere with movement and storage. For ease of movement, the heater, like others, is equipped with wheels.
Compact, narrow.
Maintains temperature well.
Simple, clear control.
It is convenient to move around the rooms, even when hot, thanks to the wheels and the handle.
Relatively fast heating due to high power.
Short wire.
The price is 4,500 rubles. Compared to the previous model, it has the same power, smaller dimensions and compartments for convenient wire storage. 89% of users recommend it for purchase.
Fan heaters – fast heating of a small room
This type of device is characterized by low cost and simple device. The heating element is placed in front of a powerful fan and heats the air. At the same time, the fan accelerates the flow of warm air around the room and takes cold or cooled air from the other side.
Positive aspects of this device:
allows you to quickly warm the entire room;
takes up very little space;
can be used in the warm season as a fan.
As a rule, fan heaters consume from 1 to 2.5 kW per hour of operation. Almost all models have a heating element heating regulator and a fan operation intensity regulator. It is convenient when the device can be controlled remotely or set the time to turn on and off. Also, you should pay attention to the overheating protection system and the quality of the network cable.
Negative sides:
The fan heater dries the air;
Disperses dust and microparticles through the air;
Quite noisy when working.
See also – Rating of the best Ballu heaters of 2022
We re-read a huge number of consumer reviews and determined the TOP-5 most interesting in terms of the ratio of functionality and technical characteristics of the model.
Ballu BFH/S-11
Characteristics
maximum heating area: 25 sq.m
heating power: 2000 W
installation: floor
protection: overheating shutdown
control: mechanical
number of operating modes: 2
I want to start with Ballu BFH/S-11. The fan heater with a heating element with a power of 2 kW has a typical design, equipped with a convenient handle, behind which the switches are located. One of them turns on the operating mode, and the second controls the fan speed. The fan heater has 3 operating modes – at full, half power and without heating. Thanks to the latter function, it can be used as a normal fan to cool the room in summer.
The model is equipped with a thermostat for automatic maintenance of air temperature.. There is a protection against overheating, which also works when the ventilation grill is partially or completely blocked. The appliance shuts off if it tips over or is tilted too hard. Effective for rooms up to 25 m². According to the degree of dust and moisture protection belongs to the class IP20, i.e. not designed for operation in conditions with high humidity. It weighs only 1 kg and has small dimensions – 25.2x20x14 cm.
Compact.
Works quietly.
Fast air heating.
2 heating modes and the ability to use as a fan.
When first turned on, there may be a smell of plastic.
For some users, it does not turn off when rollover.
. Despite the low price, the model stands out for its stylish design, high power and the presence of all mandatory protective options. 92% of users recommend it for purchase.
Oasis SB-20
Characteristics
features: thermostat, temperature adjustment
heating power: 2000 W
installation: floor
protection: overheating shutdown
control: mechanical
number of operating modes: 3
The next step in the TOP is Oasis SB-20. 2-kilowatt heater with original design. The heater with a diameter of 25 cm and a height of 12 cm is located horizontally, the inlet is located on the side, while the heated air exits upwards. The manufacturer tried to solve the problem of uniform distribution of warm air throughout the room.
The model is designed for heating an area of 20 m² and can also work on 3 modes, including heating at half power and blowing without heating. Like all heaters, the model is equipped with a thermostat and a safety shutdown to avoid overheating.
Interesting view.
Small, lightweight.
Fast heating.
Noise is not strong.
Tight mode switching.
The build quality is questionable for some users.
. Most users were interested in the original design of the fan heater. Otherwise, the model is practically no different from the same budget counterparts. 93% of users recommend the model for purchase.
Engy EN-513
Characteristics
features: thermostat, temperature adjustment
heating power: 1800 W
installation: floor
protection: overheating shutdown
control: mechanical
number of operating modes: 2
In third place is Engy EN-513. Another original model. The control buttons and the operation indicator are located on the side. The heating element at the fan heater is made of ceramics. The model can work in three modes: ventilation is available without heating, heating with a power of 1 or 2 kW. Due to the mechanical thermostat, the set heating level is maintained and a protective shutdown is ensured in case of a threat of overheating. Equipped with a handle for easy portability.
Interesting design.
Rapid heating of the room.
Work at two speeds. Ability to work without heating.
Quiet operation (45 dB).
When first turned on, there may be a smell of plastic.
. Compared to previous models, it stands out for being equipped with a ceramic heating element. Otherwise, the fan heaters practically do not differ in characteristics, with the exception of the appearance. 85% of users recommend the model for purchase as the best price-quality ratio.
Electrolux EFH/C-5125 Prime
Characteristics
maximum heating area: 20 sq.m
heating power: 1500 W
installation: floor
protection: overheat shutdown, rollover shutdown
control: mechanical
number of operating modes: 2
Second place goes to Electrolux EFH/C-5125 Prime. A model of a very stylish Ergonomic design and ultra-compact size (18.5×24.5×10.5 cm), made in black and white. Made from impact and heat resistant plastic. Tthe 1500 W fan heater is equipped with a thermostat with Soft Touch coatingoperates in two heating modes (full and half power) or ventilation mode.
Designed for rooms up to 20 m². As a heater a ceramic element is used, which does not dry the air and is safe for health. It has built-in protection against overheating, as well as an emergency shutdown in case of a strong tilt or rollover. The device has a handle on top for easy portability.
Nice view.
Compact.
Fast heating.
Heat resistant plastic.
Convenient carrying handle.
In comparison with the already described models, it stands out for its more reliable execution, it is made of materials that are durable and safe for humans and the environment. And although it is inferior to them in terms of power, it provides fast and high-quality heating of the room. 82% of users are completely satisfied with the capabilities of the device.
RESANTA TVK-2
Characteristics
maximum heating area: 18 sq.m
heating power: 1800 W
installation: floor
protection: overheat shutdown, rollover shutdown
control: mechanical
number of operating modes: 2
And the first place in the rating of fan heaters is RESANTA TVK-2. Model with 1800 W ceramic heating element for heating a room of 22 m². Features a swivel body design. This allows the appliance to perform airflow by turning on the base for a more even distribution of airflow throughout the room. Works, like other models, in two modes of heating and fan mode.
Equipped with a thermostat to maintain the set temperaturea safety shutdown to avoid overheating and a tip-over or tilt shutdown. The switches are placed on the top of the case, and a large operation indicator is located on the front.
Fast heating.
Rotation mode.
There is a carrying handle.
Moderately noisy.
When the rotation is turned on, clicks are heard (an isolated case), there is a case of the absence of this function (breakage or marriage).
. In comparison with previous models, it is distinguished by the presence of a rotation mode for uniform distribution of warm air around the room or blowing in fan mode. It has all the mandatory protective options and good build quality, especially considering the low cost. 90% of model owners recommend it for purchase.
The lower the temperature outside the window drops, the more often we think about how to warm the room until the central heating turns on. This question is especially of concern to those who cannot count on common boiler rooms at all, and are forced to heat their homes on their own.
A wide range of heating appliances often puts us in front of a difficult choice. How to choose the right heater for an apartment, cottage or large country house? What are they and what should you pay attention to when buying? We will look at the answers to these and other questions below.
Oil heaters
Such heaters are great for heating not too large rooms. An oil cooler is a small battery that is filled with special mineral oil. Also inside there are one or more heating elements with the help of which the heating takes place. Outwardly, they are similar to traditional cast-iron batteries, consisting of several sections. The more of them, the more heat the heater is able to give.
Some oil coolers have built-in fans. They disperse warm air around the room, and heating occurs faster.
Sometimes you can find oil coolers of a slightly different design. They are a single or double sealed panel filled with oil. The surface area of such a device is lower compared to “batteries”. This means that it will warm up the room much longer. However, at the same time, it takes up much less space and can be used in small spaces.
Like all heaters, oil batteries have both advantages and disadvantages. The first ones include:
Most heaters are equipped with a thermostat. It allows you not to “burn” electricity for nothing, but to set the air temperature in the room, upon reaching which the device will turn off on its own.
Many models are equipped with a timer. Thus, you can program the heater to turn on at a specific time.
Pretty democratic value.
Compactness and mobility. Most models are equipped with special legs and wheels. With their help, you can place the device in any convenient place.
Hot oil takes a long time to cool down. So the heater will give off heat for a long time after it is disconnected from the network.
Models without a fan operate completely silently.
There are also many disadvantages of oil heating radiators. The main one is that the surface of the battery gets very hot. So it should not be placed in those rooms where there are small children. An oil heater weighs a lot. In addition, it takes quite a long time to reach operating temperature. So if you want to quickly warm up the room, this option will not work. Well, the main drawback: oil heaters can not be called economical. They consume quite a lot of energy.
Convection heaters
The device of such a device is subject to the laws of physics and is based on the phenomenon of convection. Everyone knows that cold air is heavier than warm air, which means it is located closer to the floor. It gets through the lower grate of the heater to powerful heating elements, heats up and naturally rises to the ceiling. Meanwhile, the process is repeated from the beginning.
Depending on the type of fastening, convectors can be divided into 4 main categories:
Wall. They have a nice design and can serve as an additional decoration of the interior. Most often they are placed under the window like conventional batteries.
Floor. They have additional legs or wheels, thanks to which they can easily move in any direction.
Embedded. Differ in the complexity of installation. They are built into pre-prepared niches in the floor and are used for additional heating of rooms with large panoramic windows.
Ceiling. They are installed, like wall-mounted ones, only at the top, on the ceiling.
Depending on the type and source of heating, convection heaters are divided into the following types:
Gas. Often used for heating industrial premises of a large area. Rarely used in the residential sector.
Water. In some cases, they require additional equipment: pipelines and a hot water boiler.
Electrical. The most popular option for houses and apartments. They do not require the installation of additional equipment, are easy to maintain and install.
Some convection heaters are equipped with additional fans. This contributes to better air circulation and allows you to warm up the room well in a relatively short time.
The advantages of such devices include:
Relative quiet operation (if there is no additional fan).
The presence of a built-in thermostat that provides independent switching on and off of heaters at the right time.
Overheating alarm relay.
relative safety. The surface temperature of the heater rarely exceeds 65 degrees. So getting burned is unlikely.
Ease of use, especially for outdoor models. You don’t need to install anything, just plug it into a power outlet.
They are quite economical and consume a quarter of energy less than their oil counterparts.
The downsides of such devices, though a little, but they still exist.
Firstly, with their help it is difficult to warm up very large rooms. A portion of warm air will cool down before the next one heats up. So they are not suitable for rooms with high ceilings.
And secondly, the convection type of heaters is not suitable for people suffering from various forms of allergies. Constant air circulation creates drafts, which contributes to the active movement of dust particles and household mites around the room.
Infrared heating units
This is one of the most modern types of climate technology. Their principle of operation is based on the emission of infrared waves of various ranges. A good infrared heater can be compared to a bright sun warming us on a summer day. Inside the heaters there are special lamps made of quartz, carbon or halogen. Air is evacuated inside the tubes and there are tungsten or carbon fiber filaments. Behind the tubes is a mirror or polished metal reflector. The front is covered with a mesh panel.
Unlike all other heating devices, infrared heaters do not warm the air, but the surrounding objects. Already they, in turn, transfer heat into space.
Like convection, these devices come in different mounting methods. They can be placed under the ceiling or hung on the wall. And you can prefer a portable floor option. It is also good because it can be taken out, for example, to the veranda. Since the rays heat objects and scatter in the air, they are not afraid of any drafts or wind. Thus, this is the only device that can effectively warm you in open areas.
Advantages of infrared heaters:
Very economical consumption of electrical energy.
Perfect noiselessness during operation.
They can work without moving air in space, which means they are ideal for allergy sufferers.
When you turn on the heater, it will become warm in just a few seconds. You don’t have to wait until the room warms up completely.
The territory warms up simultaneously in all directions. It all depends on where exactly the rays are directed.
Disadvantages of devices:
Care should be taken when choosing a powerful shortwave instrument. If the calculations are made incorrectly, headaches may occur. They should never be used in rooms with low ceilings. They are intended mainly for outdoor use.
High-quality infrared heaters have a higher cost compared to other types of climate technology.
fan heaters
Traditional thermal fans are considered to be the most democratic in terms of cost and easy to operate. They are installed on a table or on the floor and are able to provide fairly quick heating of the air in the room.
The variety of such heaters is small. It all depends on what kind of heating element is installed inside. They can be:
Open spiral – heating temperature is about 700-800 degrees.
Tubular heater – heating more than 200-250 degrees.
Ceramic plate – no more than 190 degrees.
Devices with an open coil, of course, warm up the room faster, but they burn oxygen and pollute the room with combustion products of dust and other small particles. In this case, it is best to prefer a model with a ceramic plate. The heat from it will be the same, but the smell is much less.
To quickly warm up the room, many models are equipped with an additional rotary device. In this case, they are able to distribute warm air 180 around them.
With all their positive qualities, fan heaters are quite buzzing, so that during long work they can cause headaches.
What options to choose?
So which heater to buy for your home, office or cottage? What type to give preference?
Regardless of which option you prefer, you should first decide on some basic parameters. Perhaps their definition will help you make the right choice.
Accommodation
Underfloor heaters are the most popular. This design allows you to move the device to a convenient place or hide it in the pantry until the next time.
Fixed wall or ceiling placement is necessary when the instrument is to be used permanently. In this case, the inclusion will be made with one click, and the wires will not get tangled underfoot.
Power
In the general case, this parameter is selected at the rate of 0.1 kW per 1 square meter of the room. That is, 1.5 kW is enough to heat a room of 15 m2.
The presence of a thermostat
The presence of this device allows you to maintain the set temperature automatically. Thermostats are electronic and mechanical. The first sets the parameters more precisely, but can be damaged by random power drops in the network. The second is much more durable, but its accuracy rarely exceeds 2 degrees.
In order not to spoil the electronic thermostat, it is necessary to install an additional protection system against voltage surges.
Additional functions
Many models of climate technology have additional options designed to provide the desired degree of comfort and safety. These include:
waterproof case;
protection against overheating or freezing;
various timers;
rollover shutdown;
ionizers or humidifiers.
By themselves, they should not be a decisive criterion in the choice, but they can tip the scales to one side or another, other things being equal.
Which is better to choose?
Choosing a heater for your home is not an easy task. It is difficult to give advice on this matter. It all depends on what kind of room should be heated and how quickly it needs to be done.
For example, a fan heater with a ceramic plate is suitable for installation in a nursery. All other options should be used exclusively under parental supervision or placed under the ceiling.
For the bedroom, it is best not to use models that have a built-in fan. Their noise will be annoying during sleep. In this case, an oil cooler or a conventional electric convector is best suited.
If you come to the country for a short time and want to quickly feel comfortable, a portable infrared model is the best fit. With it you will be quite comfortable both in the house and in the yard.
In general, if you correctly determine exactly where and how often the device will be used, then the answer to the question of which heater to choose for the house for the cold season will be found by itself.
When the heating season begins, the owners of apartments and country houses prefer autonomous heating sources: electric fireplaces, oil heaters or gas convectors. Not so long ago, a quartz infrared heater appeared on the market, which can lure buyers to its side – it does not overload the network so much, it is fireproof and consumes electricity more economically than others. Due to these qualities, the device will serve the owners longer, will effectively warm up the room and keep the heat for a long time when turned off.
Device and principle of operation
The device contains a heating element – a vacuum flask made of quartz mineral with a spiral inside, which is made of tungsten. The principle of operation of the heater is that the tungsten coil heats up under the influence of current and emits infrared rays. The rays do not heat the air, but the floor, walls, ceiling and objects that are in their path, and these objects already give off heat to the entire room. And also the device is equipped with a reflector (reflector) of rays, due to which heat is dissipated more evenly. Reflectors are made of stainless steel and in addition to reflecting the rays, they perform the function of protecting the heater body. Some models of devices are equipped with a thermostat.
Advantages
The main advantage of a quartz infrared heater is its safety – a hot spiral and a flask are protected by a reflector and an additional grid. Other benefits include:
high efficiency factor;
saving electricity;
does not pollute or dry the air;
does not burn oxygen;
long service life;
wide price range;
small size of the device.
The heater quickly warms up a small area. It will not cope with large rooms so quickly, but if necessary, the problem will be solved by installing an additional device. And also, buyers opt for a quartz infrared heater, because being under infrared rays has the same relaxing effect as being under the sun’s rays.
Disadvantages of the heater
First of all, the disadvantage is that it heats only those objects that are within the reach of its rays. The problem can be solved by purchasing an additional device, but it is more reasonable to consider options for other heating devices. The disadvantages also include:
Average level of safety when using; despite the fact that hot parts are protected, curious children and animals can, if desired, get into them and injure themselves.
The device is not suitable for high-quality heating of a large apartment, cottages and other large areas.
Damaged heating elements (coil and bulb) cannot be repaired.
Not too solid appearance may also seem like a disadvantage for some buyers.
Varieties of quartz infrared heaters
Models of devices differ in the number of heating elements inside. They come with one, two or three flasks inside – the quantity affects the quality and area of u200bu200bheating and the price of the device. In addition, they differ in the method of attachment:
floor;
wall.
ceiling
And in appearance:
vertical;
horizontal.
There are also monolithic models of quartz heaters.
Monolithic quartz heaters
A monolithic quartz heater differs from an infrared heater primarily in its appearance and principle of operation. The monolithic type of device is presented in the form of a rectangular plate, which is made of melted quartz. A stainless steel spiral is installed inside the plate. It has all the advantages and disadvantages of an infrared quartz heater, and in addition, the device can still work when the electricity is turned off.
How to choose a quartz heater
The information provided in the article should be enough to understand how to choose a quartz infrared heater and whether it is well suited for the room to be heated. But first of all, it is important to know the size of the room or building, since the heater works best in small buildings or as an additional source of heat to the existing central heating in larger rooms.
If one device is not enough for heating and you plan to buy another one, you need to calculate whether this will save energy. For this, there is a formula that says that for every 10 m2, 1 kW of energy is spent. The power of quartz infrared heaters starts from 800 watts. If the indicators are not satisfactory, it is worth considering other options for heating devices.
In this ranking, I have collected the 5 best Tefal steamers of 2022. Tefal, a popular brand from France, has gained popularity thanks to an innovative way of making kitchen utensils with aluminum-based Teflon non-stick coating. The main assortment of the company consists of various appliances for cooking – electronic and ordinary. Tefal frying pans are a symbol of quality in all countries of the world. Other offers from the brand deserve attention. This review discusses the appliances necessary for a healthy diet – Tefal steamers, which models are on sale this year and whether they deserve consumer attention.
Tefal VC 1301 Minicompact
The model has a high rating among buyers, it is a functional and inexpensive unit with an average price tag of 3900 rubles. It is completed with three tiers for bookmarking products. Managed by mechanics. The power of work is 650 watts. There is an indicator that signals the power on, an indicator of the amount of liquid, after it is finished, the steamer turns off.
Housing made of impact-resistant plastic, containers made of a similar transparent material. The kit contains a bowl for rice. The model is not equipped with a screen. The manufacturer provides compact folding of the device for storage. There is no delayed start, but there is an aqua timer that calculates the required time based on the volume of water filled.
Advantages:
Budget price.
Rice cup.
Folds compactly for storage.
Large condensate collection tank.
Flaws:
Interchangeable bowls.
There is no power off button.
Aquatimer – the device does not have a timed cooking setting, it turns off only after the end of the water. There are no adjustment knobs on it.
Tefal VC 1006 Ultra Compact
The model is a little more expensive, its average price tag is 6400 rubles. It is suitable for those who need to have a mechanical cooking time regulator on the body. In this steamer, the control is implemented in a classic way – a rotary mechanical switch, with which it is easy to set the time required to bring a certain product to readiness. The maximum time available for setting is 60 minutes, when the 0 mark is reached, the steamer turns off on its own and an audible signal sounds about the end of work.
The device has 3 tiers. Works with a power of 900 watts. Equipped with a power indicator. The volume of each basket is 3L, the water tank holds 1.5L, the rice bowl holds 1L. There is a water level indicator. The grills are removable, there are recesses for cooking eggs. Adding liquid during the cooking process is allowed. It is possible to compactly fold the device for storage. The case is made of stainless steel, containers are made of transparent impact-resistant plastic.
Advantages:
Folds compactly for storage.
There is a timer.
Double bottom to collect condensate and grease.
Steam does not come out of the appliance during use.
Rubber feet for stability.
Cooks quickly.
Simple and reliable design.
Flaws:
According to customer reviews, it is difficult to wash the grilles.
Short power cord.
Tefal VC 1451
Significantly differs from the baskets mentioned earlier by the material of the baskets – stainless steel, the body is made of plastic. It is completed with two tiers and a bowl for preparation of rice grain. Managed by mechanics. There is a timer for an hour, at the end of the program automatically turns off the device. Baskets can be interchanged, compact folding for storage is provided. Water level indicator. During cooking, water can be added to the steamer.
Advantages:
Metal baskets.
Easy cleaning.
Folds up compactly.
Possibility to add water at any time.
Timer.
Flaws:
Quiet signal for the end of cooking.
Metal baskets are not transparent and do not allow you to observe the preparation without opening the lid.
Tefal VC 1401 Convenient
Made entirely in black. There are two tiers for cooking. It is controlled mechanically with a timer for one hour, after the end of the program it turns off automatically. The power of the device is 950 watts. The case and bowls are made of shock-resistant plastic. It is completed with a bowl for rice grain, there are deepenings for preparation of eggs. Water level indicator. There is no delayed start system. This model cannot be topped up with water during use.
Advantages:
Durable materials.
There is no smell of plastic when cooking.
The shutdown timer of mechanical type.
Easy to wash.
Prepares delicious and healthy meals quickly.
Flaws:
Only two tiers.
There is no possibility to add water at any time.
Tefal VC 3008 Steam’n’light
The TOP device completes with an average cost of 7500 rubles. The only electronically controlled steamer currently presented by the company. It is made in black, the case is made of impact-resistant plastic, the same transparent material is used for the bowls. Power steamer 900 watts. There is an indication signaling the power supply and a timer for one hour, upon reaching the set time, the device turns off automatically. The screen is missing.
On the body there is an indicator showing the amount of water. It is completed with lattices that can be removed, there are recesses for eggs, a mold for muffins and muffins. It is allowed to add water without interrupting the cooking process. Electronic control allows you to cook using automatic programs in the amount of 6 pieces. There is a thermostat. There is no delayed start. Provides compact storage. The steamer can defrost and cook frozen food.
Advantages:
Clear and simple control.
Compact storage.
Large comfortable pallets.
Presence of automatic cooking programs according to recipes.
Sturdy, odorless plastic.
The function of maintaining the temperature of the finished dish up to 60 minutes after the end of cooking.
Shutdown at the end of water.
Beautiful and functional lighting.
Wide functionality.
Flaws:
According to buyers, details are difficult to wash.
Difficulty adding water.
It turns off when the water runs out, but does not signal this.
When you need to temporarily heat the room, you can do this with a universal gas heater. They come in the form of converters, wall-mounted or floor portable. In nature, in the cool season, you can use the outdoor version of such gas equipment, and when hiking or fishing, its compact counterpart will come in handy. This type of heating devices is valued for mobility, economy, high performance. After studying hundreds of reviews and expert opinions, I have compiled a rating of the best gas heaters in 2022.
Rating of the best manufacturers (firms)
When choosing heating equipment, the first thing you should pay attention to is the quality of the device. Of course, it should be chosen based on the needs and place of its application. But in order for it to be effective in operation, it is recommended to pay attention to the manufacturer (company) that has positive recommendations and reviews about the quality of the product.
The market for such products is oversaturated. Heating equipment is represented by many manufacturers that meet quality criteria. However, among them there are those that won the championship. Among the companies whose heating equipment deserves attention and has proven itself well during operation, the following can be distinguished.
Ballu – a specialized company for the manufacture of climate equipment. It has representative offices all over the world, the main ones are located in Japan, Korea, Lithuania, Poland and China. The company has in its composition specialized laboratories for conducting experiments in design and a design bureau.
Timberk – the company was founded in 2004, today it distributes its products in Eastern Europe, Russia, the CIS. Climate equipment is presented in a wide range (more than 120 items), which can be conditionally divided into split systems and specialized heating equipment.
Kovea – founded in 1982, is a popular and widespread company in the world for the manufacture of spectrum goods outdoor. Including has a wide range of gas burners and lamps.
Pathfinder — Russian company, with a specialized profile — travel equipment. Among other things, it produces gas-fired heating devices for the tourism industry. The products have been produced since 1991, have proven themselves well and are supplied to neighboring countries.
Siabs – Italian company, marked by the uniqueness of the presented products, which has no analogues. Especially the company was noted for its impeccable quality during the operation of heating devices.
The companies mentioned above were selected in the rating of the best, formed on the basis of consumer reviews. The evaluation criterion is the quality and efficiency in the process of long-term operation.
Types of gas heaters
If you decide to buy a gas heater, then you should familiarize yourself with their varieties. Heaters of the same type are intended for the house and apartment. And for a garage or a summer residence, completely different gas burners are offered. As well as a separate category are outdoor devices for heating.
Consider which of the models are the best for use in specific conditions.
TOP 3 floor gas heaters
Timberk TGH 4200 M1
The rating is opened by the Timberk model, which has a minimum power of 1.55 kW and a maximum of 4.2 kW. It is designed to heat a room up to 60 m². Fuel – propane, butane. Gas consumption – 0.31 kg / h. A gas cylinder up to 15 kg can fit inside the device (it must be purchased separately). Three levels of heating power. The heater has the function of infrared heating, CO level control system2, rollover cut-off system, gas control and piezo ignition. The scope of delivery includes a reducer and a gas hose. All switches are located at the top of the case, so quick access to the settings is possible.
piezoelectric ignition;
blocking the gas supply without fire;
durable, high-quality case;
low gas consumption.
strong gas pressure extinguishes the glow plug;
sometimes there is an arbitrary shutdown of the device;
gas cylinder must be purchased separately;
ceramics crumble over time;
without a cylinder easily overturns;
there is a smell of gas.
The model copes well with heating a large room with a small gas consumption (300 g / h). But the lack of a cylinder in the delivery set is a minus, although for such a price we can hardly demand more. The device is not without flaws, during its operation the smell of gas is felt, periodically it turns off by itself. The price is 6 thousand rubles.
TOP-2 wall-mounted gas heaters
Hosseven HDU-3
The wall-mounted heater of the German company Hosseven with a power of 2.7 kW is designed for heating a room with a maximum area of 30 m² at a gas flow rate of 0.27 m3/hour. The heat exchanger of the gas convector Hosseven HDU-3 is made of steel, has developed fins, which increases heat transfer, provides a quick exit to operating power after switching on. The built-in thermostat maintains the set temperature. It has a closed combustion chamber. The intake of air and the ejection of combustion products is carried out through a coaxial flue pipe. A telescopic coaxial chimney is included in the scope of supply. Air heaters do not require additional organization of ventilation. The device is made of high quality cast iron, which ensures a 50-year service life. All air heaters are equipped with a POLIDORO burner and SIT gas fittings, which additionally guarantees the reliability and durability of the equipment.
good quality assembly materials;
closed combustion cycle makes the convector safe for health;
beautiful, compact;
the ability to work from a cylinder with liquefied gas;
gas valve Sit (Italy).
with a strong warm-up, it starts to work loudly;
high price.
A model of excellent quality, which, according to the manufacturer, is designed for 50 years, with a high efficiency of 90%. The device is safe due to the closed combustion chamber, after its operation it is not necessary to ventilate the room due to the smell of gas or burning. Of the minuses – it starts to work noticeably louder when it gets very hot, otherwise it is a very successful and good device. The price is 15500 rubles.
TOP-5 compact (for a tent) gas heaters
Hyundai H-HG3-25-UI777
Gas infrared heater of a well-known manufacturer. The maximum power is 2.5 kW. Designed for heating with propane or butane of a room with a maximum area of 40 m². The gas consumption is 0.22 kg/h. The device can heat the room, cook food in the open air: for this, the delivery set includes a grill grate. It is equipped with manual ignition, heating power adjustment, protection against tipping over and overheating.
low price;
compactness;
perfectly warms;
you can cook food.
the paint peels off very quickly;
often fails;
there are cases of fire when first turned on;
bad smell;
short hose.
The model is cheap, but of poor quality: after a couple of uses, the paint begins to crumble, an unpleasant smell comes from the device. There are many cases of ignition during start-up, due to defective parts or incompetence of the user. The price is 1300 rubles.
TOP-2 gas street heaters
NeoClima 07HW-B
The Neoclima 07HW-B outdoor heater is designed for heating open spaces: gazebos, terraces, cafes. It has a stylish design, cylindrical shape, made in steel color. It will become a heating device and a stylish piece of furniture. The minimum power is 5 kW, the maximum is 11 kW. Designed for space heating with a maximum area of 20 m². Runs on propane or butane. The maximum gas consumption is 0.85 kg/h. A cylinder up to 27 kg can fit inside the device: it is installed inside the heater itself and is hidden from prying eyes. The height of the living flame is 1.5 m. Like most modern heaters, the principle of its operation is to radiate infrared heat. The heater has a gas control system, a tilt protection sensor, a piezo ignition and a thermostat. The package includes a pressure reducer, a gas hose.
can be used in open spaces;
very good as additional lighting;
smooth power adjustment (5–11 kW);
live flame – up to 1.5 m;
rollover protection sensor.
high fuel consumption;
overcharge;
warranty is only 1 year.
A very beautiful heater with a maximum open flame height of 1.5 m. It looks very nice and can be used as additional outdoor lighting at night. The device can work with different gas cylinders up to 27 liters – this is a standard indicator. But fuel consumption per hour is very high and far from economical. Thanks to its high power, its smooth adjustment, the device does its job perfectly. The price is 15 thousand rubles.
Ballu BOGH-15
The device has an interesting design: live fire enclosed in a flask made of high-quality heat-resistant borosilicate glass attracts visitors to cafes and restaurants. A unique feature of the heater is that starting, adjusting the height of the flame and turning it off is possible manually on the control unit located on the dashboard. The minimum power is 5 kW, the maximum is 13 kW, which is slightly more than in NeoClima 07HW-B. Designed to heat a room with a maximum area of 20 sq. m. Works on propane, butane. The maximum gas consumption is 0.97 kg/h. A gas cylinder up to 27 kg can fit inside the device. The heater is made of corrosion-resistant alloyed stainless steel, protected from atmospheric precipitation from above by a four-sided reflector, the surface area of which is 0.5 m². A multi-level protection system is responsible for the safety of operation. The tilt sensor turns off the flame when the gas heater is tilted more than 45 °, the thermoelectric sensor and the solenoid valve stop the gas supply in critical situations – when the flame goes out or when there is a gas leak. Due to the built-in wheel base, the heater can be freely and safely moved on any surface, despite its large size and weight (40 kg). The device can also be used as an advertising surface: for its placement, a slate magnetic surface is provided with a mount on the bottom of the case. The package includes a pressure reducer, a gas hose.
a unique modernized burner (developed by the Institute of Mechanics of the Russian Academy of Sciences);
high strength, corrosion resistance;
the unique design of the afterburner ensures 100% combustion of the fuel mixture;
thermal glass japanese flask.
high price;
large size and weight;
high fuel consumption;
before the first ignition, an air lock comes out for a long time;
the remote control is provided only in the Ballu BOGH-15E model.
The heater is very large, heavy, especially when compared with NeoClima 07HW-B. It has great power, but at the same time it has a high fuel consumption – 0.97 kg / h, so you will have to change gas cylinders very often. The device has various protective functions, which I consider to be pluses, but the NeoClima 07HW-B model has an open flame, and the BOGH-15 has a flame inside a heat-resistant flask, which is also beautiful. The price is 32300 rubles.
Electric kettles presented on Aliexpress differ in materials, control method, capacity, power. Modern electric kettles can be equipped with additional functions and options: the ability to select the heating temperature, keep warm. We have compiled the TOP 10 best electric kettles from Aliexpress in 2022, which includes both original models of an unusual design and multifunctional kettles.
SONIFER SF2058
The 0.6L stainless steel electric kettle is available in white and black. It has a rotating base, like the rest of the rating models. It is also made of stainless steel. The heating element is hidden in the housing. Boils in 4 minutes. Automatically turns off when boiling, which is typical of all electrical appliances in the review. Overheat protection. Cord length 0.6 m. Weight 0.8 kg. Power 600 W. Price: from 1100 rubles.
Advantages:
stylish look;
rapid boiling;
absence of foreign odors;
quality filter on the nose;
quiet work;
inexpensive.
Flaws:
short wire;
the black wire for the white kettle spoils the view.
ANIMORE EK-02
Electric kettle with a glass water tank with a capacity of 2 liters. Heats up in 4 minutes. Power 100W. There is a colored backlight. Price: from 1300 rubles.
Advantages:
beautiful, stylish;
light;
excellent lighting;
works quietly;
the lid opens with a button;
transparent body allows you to control the water level.
Flaws:
unreliable fastening of the handle to the glass at the top;
short wire.
Foldable Electric Water Kettle
Electric kettle blue, made of plastic and food-grade silicone that can withstand temperatures up to 230 degrees. Bottom diameter 130 mm, neck – 95 mm. Folding design allows you to adjust the capacity: 0.75 or 1L (height 95 or 145mm). Water boils in 4-6 minutes. Power cord length 0.7 m. Power up to 680 watts. Works in a network with a voltage of 100 to 240 V. Price: 1300 rubles.
Advantages:
compact;
develops;
convenient for travel;
boils quickly.
Flaws:
the off button is not automatic, it does not turn off by itself and when the water cools down, the kettle turns on and boils the water again;
there are cases of marriage.
SONIFER SF2054
Kettle made of stainless steel with a volume of 1.7 liters. Internal water level graduation. Boils in 4 minutes. Gives a sound signal about the end of boiling. On the case there is a set of buttons for indicating the heating temperature, which light up when turned on. There is a keep warm mode. There is protection against drying out. Cord length 0.7 m. Weight 1.4 kg. Power 2200 W. Operates from a network of 220 V. Price: from 1500 rubles.
Advantages:
excellent appearance;
mesh for water filtration;
shutdown is accompanied by an audible signal;
temperature maintenance mode;
You can set the desired temperature.
Flaws:
The body heats up quite a lot during operation.
KE4012
Stainless steel electric kettle in the original design with a long thin spout in the form of a goose neck, which is convenient when brewing coffee or tea. Holds 1 liter of water. Boils in 4 minutes. Control in the form of buttons on the handle. There is a keep warm function for up to 30 minutes. You can choose its value. Weight 1.275 kg. Power 1850 W. Price: from 2200 rubles.
Advantages:
unusual shape;
very comfortable nose;
boils to the set temperature;
fast heating of water;
great job.
Flaws:
heavy;
not quite accurately gaining the set temperature value.
SONIFER SF2046
Electric kettle with stainless steel body, 1.8 l capacity. Presented in a wide range of colors. Boiling water occurs after 4 minutes. Equipped with a thermometer with an arrow. Capable of retaining heat. Dry protected. Cord length 0.9 m. Power 1500 watts. Price: from 1690 rubles.
Advantages:
beautiful shape;
well made;
quiet;
boils quickly;
The thermometer on the case shows the temperature.
Flaws:
the lid is hard to open;
the water level is not visible.
Xiaomi Deerma DEM-YS802
Kettle with a volume of 1.5 liters. The case is made of a combination of glass and metal. The lid is removable. It has 6 operating modes, which include not only boiling water, but also heating, cooking soup, stewing meat, brewing herbs. To do this, the set includes a glass cup and a metal grill. It has a thermostat with temperature readings from 40 to 100 degrees. Equipped with a display. There is a timer with a delay up to 12 hours. Heat is maintained for 6 hours. Indication of inclusion and water level is provided. Weight 1.5 kg. Power 1000 W. Price: 2640 rubles.
Advantages:
many functions;
build quality;
low, it is convenient to put under the tap;
temperature control;
thermostat;
the display shows the temperature;
there is a sound alert when boiling (quiet signal);
comes with a flask for a water bath and a teapot.
Flaws:
inscriptions on the buttons in Chinese;
there is no way to heat water to a certain temperature;
to turn on, you need to press two buttons: turn on and mode (uncomfortable according to buyers);
after boiling, the indication does not turn off.
Xiaomi Mi Kettle
Kettle made of white plastic, stainless steel inner material. Has a volume of 1.5 liters. The lid opens at an angle of 30 degrees. Water boils in 5 minutes. There is a water level scale. Weight 0.897 kg. Power 1800 W. Price: 2490 rubles.
Advantages:
looks beautiful;
high build quality;
easy to use;
heats up in 5 minutes;
keeps warm for a long time
Flaws:
noisy;
no mesh on the nose.
GWAI I10
The soft turquoise color device is made of silicone. It has a folding design, as a result of which the volume can be reduced from 1 liter to 0.6 liter. Inside the case there are divisions indicating the water level. The set includes a camping kettle and a cup with a lid. All items are foldable for easy transport. Water boils in 4-6 minutes. Temperature maintenance is provided. Power 600 W. Price: 2540 rubles.
Advantages:
compact;
quality materials;
looks attractive;
there is a bag for storage;
cup included;
interesting folding design;
worth buying a set for hikers.
Flaws:
there is a slight smell of rubber inside;
according to reviews, there is a case of marriage (poor-quality plug).
Xiaomi VIOMI YM-K1503
Electric kettle measuring 21.6×23.5×14.5 cm with a non-heating body made of steel and black plastic. Capacity 1.5 liters. Equipped with thermostat to set the temperature from 40 to 100 degrees. To keep warm up to 12 hours, 4 modes are provided. There is an on indicator. There is a display. Controlled from a smartphone. It does not work without water, it is equipped with a corresponding lock. Weight 1.3 kg. Power 1800W (with 500W heat support). Price: 2799 rubles.
Advantages:
design;
quality of materials;
modes;
sound signal of the end of work;
display;
fast heating;
keeps warm.
Flaws:
the handle creaks;
Chinese fork;
There are difficulties connecting the application.
In this article I will tell you how to choose a film heater in 2022, what it is and how it works. A film type heater is a heating device that spreads heat using infrared rays. The device looks like a thin film of different sizes with a heating element and foil inside. According to the principle of execution, they are divided into: wall, ceiling and floor. Such a device is suitable for any room, as it can work even at a temperature of -30 degrees. The main advantage of such a heater is that it can be purchased not only in the form of a plain film, but also depict different illustrations on it that will complement the interior of any room.
Device and principle of operation
This device for heating is made of two heat-resistant films, between which there is a heating element. Also, most models are equipped with a thermostat that allows you to control the temperature of the device and special sensors that will turn off the device if the set temperature is reached in the room.
The principle of operation of infrared heaters is that infrared rays do not heat the air itself, but objects and surfaces that they collide with, and these objects, in turn, already spread heat around the room. By the same principle, the sun heats the planet.
Types of infrared film heaters
According to the installation method, a flexible film heater for the home can be floor, ceiling and wall. The latter type of heater is recommended to be used more as a decoration or as an additional source of heat, rather than as a full-fledged heating device, since the radiated heat will quickly go to the ceiling, which is not very effective. Therefore, if you have to purchase a device purposefully for heating a room, then you need to choose a ceiling or floor version.
Ceiling
Buyers most often opt for this type of film heater, as it most effectively distributes heat throughout the room. This happens because infrared rays quickly reach the floor, give off heat to other objects and air, and then go up again, which gives the effect of volumetric heating. However, it is worth considering that despite all its advantages, if the ceilings in the room are higher than three meters, then the infrared rays will not be able to reach the floor, which, accordingly, makes it pointless to install it on the ceiling, and it is worth considering the floor option.
Floor
A film heater in the floor version has even more advantages over the ceiling view of such a device. The height of the ceiling is no longer important here, since few buyers are interested in a warm ceiling, but a warm floor always adds comfort to the room. But still, it is risky to put a film heater on the floor if you plan to furnish the room with too heavy furniture or appliances – there is a high risk of the device breaking down under their weight.
Advantages and disadvantages of a film infrared heater
The main advantage of a film heater over other types of heating devices is that it does not heat up to high temperatures, therefore, you can not be afraid of accidental burns or fires. Other benefits include:
long service life;
energy efficiency;
ease of installation;
noiselessness of work;
made from environmentally friendly components;
The device does not pollute or dry the air.
Buyers also note that being under the infrared rays of the heater gives the same relaxing effect as being under the sun.
The device is still not perfect and has several disadvantages:
the room will quickly cool down after the device is turned off;
not too strong heating – the room will be comfortable, but not warm;
ceiling models can overheat household appliances;
a wall heater is not effective to use as a full-fledged heating device.
Installation of an infrared film heater
A film heater is installed in a slightly different way than other types of heating devices, however, it is quite possible to do it yourself, it is not necessary to resort to the help of specialists. The main thing to remember is that the heater cannot be turned on while the film is in a rolled state, the distance between the films should be no more than 4 mm and the film can only be cut along the lines left by the manufacturer. To install the heater, you need to follow the following sequence of actions:
Reflective screen mount.
Film installation.
Sealing with aluminum adhesive foil.
Installation of heating elements.
Turning on the device.
And also, all manufacturers of film heaters prohibit mounting the device with nails and self-tapping screws. You need to fix the device only with a construction stapler.
