specifications and customer reviews about the model, as well as what to look for when choosing

Blender Redmond RHB 2944 is a small-sized universal device.

With it, you can automate part of the work in the kitchen and make cooking less time-consuming.

With this appliance, you can prepare dishes such as pates, pastas, smoothies, curd mass, various creams and desserts.

Some dishes cannot be prepared at all without a blender, which makes it an indispensable assistant when working in the kitchen.

Redmond RHB 2944

The design of the device is made in a laconic style. The body of the device (electric motor block), as well as nozzles for replaceable containers and nozzles are made of white plastic. In its upper part there are two control buttons made of rubberized grayish material. The buttons have a soft pressure, fingers do not slip off them.

The top button is responsible for turning on the blender, the button below it is responsible for turning on the “turbo” mode. This mode allows you to increase its power to maximum (1300 W). The blender is equipped with overheating protection, which allows you to extend its service life and make it safer to use.

The device is powered from a network with a voltage of 220 to 240 Volts, the power cord is non-removable, it does not have twist protection. Blender nozzles are made of stainless steel, replaceable containers are made of transparent hard plastic. Country of origin — China.

Device features

Blender Redmond RHB 2944 performs the functions of three devices in one:

1. Blender (immersion type) — allows you to extremely finely grind products, while mixing them. A small S-shaped knife is built into the base of the blending attachment, which rotates at high speed to quickly turn the ingredients into a homogeneous mass. It is used for products with a soft consistency, such as cottage cheese, boiled potatoes, minced meat, giving them a special taste.
2. mini mixer — Using the whisk attachment, you can beat egg whites, dough for various pastries, and make various drinks. At the same time, the design is lighter compared to a conventional mixer, which facilitates the cooking process.
3. chopper — unlike a blender, it allows you to cut more solid foods. On average, the size of the cut is comparable to a coarse grater, it can be adjusted by the duration of grinding. The blade of the chopping attachment, like the blender attachment, has the shape of the letter S, but with a larger diameter. You can grind: nuts, herbs, vegetables, meat, cheese.

Specifications

Advantages and disadvantages

Bottom line: the shortcomings will not be critical for those who are used to cooking in small portions. However, they are compensated by the low weight and compactness of the device.

Model configuration

The Redmond RHB-2944 device package includes the following:

1. Electric motor block — 1 pc.
2. S-shaped knife — 1 pc.
3. Nozzle-blender — 1 pc.
4. Adapter for whisk attachment — 1 pc.
5. Whisk attachment — 1 pc.
6. Chopper bowl with lid — 1 pc.
7. Mixing glass — 1 pc.
8. Operation manual — 1 pc.
9. Service book — 1 pc.

Instructions for use

As a blender

1. Attach the blender attachment to the motor unit.
2. Place ingredients in a mixing glass.
3. Plug in the appliance.
4. Dip the blender into the food bowl and hold down the power button.
5. Process products to the desired consistency, if necessary, switch to turbo mode by pressing and holding the appropriate button. Recommended non-stop running time under load: 1-2 minutes.
6. At the end of work, turn off the device from the network, disconnect the nozzle for subsequent washing.

As a mixer

1. First, attach the whisk adapter to the motor unit, then attach the whisk there.
2. Place the ingredients in a mixing glass.
3. Plug in the appliance.
4. Dip the whisk into the bowl with the ingredients and hold down the power button.
5. Beat the products to the desired consistency, if necessary, switch to turbo mode by pressing and holding the appropriate button. Recommended non-stop running time under load: 30 seconds.
6. At the end of work, turn off the device from the network, disconnect the nozzle for subsequent washing.

As a grinder

1. Attach the blade attachment to the center of the chopping bowl.
2. Place the ingredients in a bowl.
3. Close the bowl with a lid. Connect the block with the electric motor.
4. Plug in the appliance
5. Grind products to the required consistency, if necessary, switch to turbo mode by pressing and holding the appropriate button. Recommended non-stop running time under load: 1-2 minutes.
6. At the end of work, turn off the device from the network, disconnect the nozzle for subsequent washing.

If the device itself stops working, then the overheating protection has tripped. Wait 10 minutes before switching on again.

When cleaning the device, avoid aggressive and abrasive products.

Rules for safe handling of the device

• Wash under running water and immerse in water only removable nozzles and bowls. Do not immerse the unit with an electric motor in water and wash it under running water!
• Do not allow children and persons without the necessary skills to use the electrical appliance.
• Do not use the device in case of malfunctions or damage. Repairs must be carried out by specialists of the service center.

What to look for when buying?

To avoid unpleasant situations and minimize the likelihood of buying a low-quality blender, you need to:

• When purchasing a blender, you should pay attention to the completeness, condition of the components and packaging.
• Ask the seller to demonstrate the performance of the device you are buying. If you buy a blender online, check the product at the point of issue of orders or with the courier.
• If you suspect a fake product, ask the store for documents confirming the authenticity of the product.